...
首页> 外文期刊>Mycobiology >Morphological Characteristic Regulation of Ligninolytic Enzyme Produced by Trametes polyzona
【24h】

Morphological Characteristic Regulation of Ligninolytic Enzyme Produced by Trametes polyzona

机译:Trametes polyzona产生的木质素分解酶的形态特征调控

获取原文
           

摘要

A newly isolated white rot fungal strain KU-RNW027 was identified as Trametes polyzona , based on an analysis of its morphological characteristics and phylogenetic data. Aeration and fungal morphology were important factors which drove strain KU-RNW027 to secrete two different ligninolytic enzymes as manganese peroxidase (MnP) and laccase. Highest activities of MnP and laccase were obtained in a continuous shaking culture at 8 and 47 times higher, respectively, than under static conditions. Strain KU-RNW027 existed as pellets and free form mycelial clumps in submerged cultivation with the pellet form producing more enzymes. Fungal biomass increased with increasing amounts of pellet inoculum while pellet diameter decreased. Strain KU-RNW027 formed terminal chlamydospore-like structures in cultures inoculated with 0.05?g/L as optimal pellet inoculum which resulted in highest enzyme production. Enzyme production efficiency of T. polyzona KU-RNW027 depended on fungal pellet morphology as size, porosity, and formation of chlamydospore-like structures.
机译:通过对新分离的白腐真菌菌株KU-RNW027的形态特征和系统发育数据进行分析,将其鉴定为Trametes polyzona。曝气和真菌形态是驱动菌株KU-RNW027分泌两种不同的木质素分解酶(锰过氧化物酶(MnP)和漆酶)的重要因素。在连续摇动培养中,MnP和漆酶的最高活性分别比在静态条件下高8倍和47倍。菌株KU-RNW027以沉淀和游离形式的菌丝体形式存在于水下培养中,沉淀形式产生更多的酶。真菌生物量随颗粒接种量的增加而增加,而颗粒直径减小。菌株KU-RNW027在接种0.05?g / L作为最佳颗粒接种物的培养物中形成了末端的衣原体孢子样结构,从而产生了最高的酶产量。多菌毛KU-RNW027的酶生产效率取决于真菌团粒的形态,如大小,孔隙率和衣原体样结构的形成。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号