Low Conductivity Decay of Sn–0.7Cu–0.2Zn Photovoltaic Ribbons for Solar Cell Application

摘要

The present study applied Sn–0.7Cu–0.2Zn alloy solders to a photovoltaic ribbon. Intermetallic compounds of Cu 6 Sn 5 and Ag 3 Sn formed at the Cu/solder/Ag interfaces of the module after reflow. Electron probe microanalyzer images showed that a Cu–Zn solid-solution layer (Zn accumulation layer) existed at the Cu/solder interface. After a 72 h current stress, no detectable amounts of Cu 6 Sn 5 were found. However, a small increase in Ag 3 Sn was found. Compared with a Sn–0.7Cu photovoltaic module, the increase of the intermetallic compounds thickness in the Sn–0.7Cu–0.2Zn photovoltaic module was much smaller. A retard in the growth of the intermetallic compounds caused the series resistance of the module to slightly increase by 9%. A Zn accumulation layer formed at the module interfaces by adding trace Zn to the Sn–0.7Cu solder, retarding the growth of the intermetallic compounds and thus enhancing the lifetime of the photovoltaic module.