首页> 外文期刊>Frontiers in Chemistry >A Novel Synthetic Method for N Doped TiO2 Nanoparticles Through Plasma-Assisted Electrolysis and Photocatalytic Activity in the Visible Region
【24h】

A Novel Synthetic Method for N Doped TiO2 Nanoparticles Through Plasma-Assisted Electrolysis and Photocatalytic Activity in the Visible Region

机译:可见光区等离子体辅助电解和光催化活性合成N掺杂TiO2纳米粒子的新方法

获取原文
           

摘要

Nitrogen doped TiO2 (N-TiO2) nanoparticles were synthesized via a novel plasma enhanced electrolysis method using bulk titanium (Ti) as a source material and nitric acid as the nitrogen dopant. This method possesses remarkable merits with regard to the direct-metal synthesis of nanoparticles with its one-step process, eco-friendliness, and its ability to be mass produced. The nanoparticles were synthesized from bulk Ti metal and dipped in 5 – 15 mmol of a nitric acid electrolyte under the application of AC 500 V, the minimum range of voltage to generate plasma. By controlling the electrolyte concentration, the nanoparticle size distribution could be tuned between 12.1 nm and 24.7 nm using repulsion forces via variations in pH. The prepared N-TiO2 nanoparticles were calcined at between 100 – 300 oC to determine their photocatalytic efficiency within the visible-light region, which depended on their crystal structure and N doping content. Analysis showed that the temperature treatment yielded an anatase TiO2 crystalline structure when the N doping content was varied from 0.4 to 0.54 at.%. In particular, the 0.4 at.% N doped TiO2 catalyst exhibited the highest catalytic performance with quadruple efficiency compared to the P-25 standard TiO2 nanoparticles, which featured a 91% degradation of methyl orange organic dye within 300 min. This solid-liquid reaction based on plasma enhanced electrolysis could open new pathways with regard to high purity mass producible ceramic nanoparticles with advanced properties.
机译:氮掺杂的TiO2(N-TiO2)纳米粒子是通过一种新颖的等离子体增强电解方法合成的,该方法使用块状钛(Ti)作为原料,硝酸作为氮掺杂剂。该方法具有一步法,生态友好和可批量生产的能力,在纳米粒子的直接金属合成方面具有显着优点。纳米粒子由块状钛金属合成,并在施加交流电500 V(施加等离子体的最小电压范围)下浸入5-15 mmol的硝酸电解质中。通过控制电解质的浓度,可以使用排斥力通过pH值的变化将纳米粒度分布调节在12.1 nm和24.7 nm之间。制备的N-TiO2纳米颗粒在100 – 300 oC之间煅烧,以确定其在可见光范围内的光催化效率,这取决于其晶体结构和N掺杂含量。分析表明,当N掺杂含量从0.4到0.54at。%变化时,温度处理产生了锐钛矿型TiO2晶体结构。特别是,与P-25标准TiO2纳米颗粒相比,0.4 at。%N掺杂的TiO2催化剂表现出最高的催化性能和四倍的效率,P-25标准TiO2纳米颗粒的特征是在300分钟内降解了甲基橙有机染料。这种基于等离子增强电解的固液反应可以为具有先进性能的高纯度可大规模生产的陶瓷纳米粒子开辟新的途径。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号