This paper addresses recycling of waste engine oils treated using acetic acid. A recycling process was developed which eventually led to comparable results with some of the conventional methods. This gives the recycled oil the potential to be reused in cars’ engines after adding the required additives. The advantage of using the acetic acid is that it does not react or only reacts slightly with base oils. The recycling process takes place at room temperature. It has been shown that base oils and oils’ additives are slightly affected by the acetic acid. Upon adding 0.8 vol% of acetic acid to the used oil, two layers were separated, a transparent dark red colored oil and a black dark sludge at the bottom of the container. The base oils resulting from other recycling methods were compared to the results of this paper. The comparison showed that the recycled oil produced by acetic acid treatment is comparable to those recycled by the other conventional methods.
展开▼
