...
首页> 外文期刊>Geoscience frontiers >Textures and mineral compositions of the Xinjie layered intrusion, SW China: Implications for the origin of magnetite and fractionation process of Fe-Ti-rich basaltic magmas
【24h】

Textures and mineral compositions of the Xinjie layered intrusion, SW China: Implications for the origin of magnetite and fractionation process of Fe-Ti-rich basaltic magmas

机译:中国西南新街层状侵入体的质地和矿物组成:对磁铁矿成因和富铁钛玄武岩分馏过程的影响

获取原文
           

摘要

The Xinjie layered intrusion in the Panxi region, SW China, hosts both Fe-Ti oxide and platinum-group element (PGE) sulfide mineralization. The intrusion can be divided, from the base upward, into Units I, II and III, in terms of mineral assemblages. Units I and II are mainly composed of wehrlite and clinopyroxenite, whereas Unit III is mainly composed of gabbro. PGE sulfide-rich layers mainly occur in Unit I, whereas thick Fe-Ti oxide-rich layers mainly occur in Unit III. An ilmenite-rich layer occurs at the top of Unit I. Fe-Ti oxides include magnetite and ilmenite. Small amounts of cumulus and intercumulus magnetite occur in Units I and II. Cumulus magnetite grains are commonly euhedral and enclosed within olivine and clinopyroxene. They have high Cr 2 O 3 contents ranging from 6.02 to 22.5?wt.%, indicating that they are likely an early crystallized phase from magmas. Intercumulus magnetite that usually displays ilmenite exsolution occupies the interstices between cumulus olivine crystals and coexists with interstitial clinopyroxene and plagioclase. Intercumulus magnetite has Cr 2 O 3 ranging from 1.65 to 6.18?wt.%, lower than cumulus magnetite. The intercumulus magnetite may have crystallized from the trapped liquid. Large amounts of magnetite in Unit III contains Cr 2 O 3 (<0.28?wt.%) much lower than magnetite in Units I and II. The magnetite in Unit III is proposed to be accumulated from a Fe-Ti-rich melt. The Fe-Ti-rich melt is estimated to contain 35.9?wt.% of SiO 2 , 26.9?wt.% of FeO t , 8.2?wt.% of TiO 2 , 13.2?wt.% of CaO, 8.3?wt.% of MgO, 5.5?wt.% of Al 2 O 3 and 1.0?wt.% of P 2 O 5 . The composition is comparable with the Fe-rich melts in the Skaergaard and Sept Iles intrusions. Paired non-reactive microstructures, granophyre pockets and ilmenite-rich intergrowths, are representative of Si-rich melt and Fe-Ti-rich melt, and are the direct evidence for the existence of an immiscible Fe-Ti-rich melt that formed from an evolved ferro-basaltic magma. Graphical abstract Display Omitted Highlights ? Texture and mineral compositions of olivine and magnetite are present. ? The Xinjie intrusion formed from evolved Fe-Ti-rich basaltic magmas. ??Cr-poor magnetite in Unit III formed from immiscible Fe-Ti-rich melts.
机译:中国西南地区攀西地区的新界层状侵入体同时具有铁钛氧化物和铂族元素(PGE)硫化物矿化作用。根据矿物组合,侵入物可以从基部向上分为第一,第二和第三单元。第一和第二单元主要由辉石和斜辉石组成,而第三单元主要由辉长岩组成。 PGE富含硫化物的层主要存在于I单元中,而Fe-Ti氧化物富集的厚层主要存在于III单元中。富钛铁矿层出现在单元I的顶部。铁钛氧化物包括磁铁矿和钛铁矿。第一和第二单元中有少量的积云和积云磁铁矿。磁铁矿晶粒通常是全金属的,并被包裹在橄榄石和斜辉石中。它们具有较高的Cr 2 O 3含量,范围从6.02至22.5wt。%,表明它们很可能是岩浆的早期结晶相。通常表现出钛铁矿溶蚀的积云间磁铁矿占据积云橄榄石晶体之间的空隙,并与间质斜生辉石和斜长石共存。积间磁铁矿的Cr 2 O 3含量范围为1.65至6.18wt。%,低于积间磁铁矿。包间磁铁矿可能已经从捕获的液体中结晶出来。第三单元中的大量磁铁矿所含的Cr 2 O 3(<0.28wt。%)远低于第一单元和第二单元中的磁铁矿。建议在III单元中的磁铁矿是从富含Fe-Ti的熔体中积累的。富含Fe-Ti的熔体估计包含35.9重量%的SiO 2,26.9重量%的FeO t,8.2重量%的TiO 2,13.2重量%的CaO,8.3重量%。 %的MgO,5.5%重量的Al 2 O 3和1.0%重量的P 2 O 5。该成分与Skaergaard和Sept Iles矿床中的富铁熔体相当。成对的非反应性微结构,花岗石袋和富含钛铁矿的共生体,是富硅熔体和富铁钛熔体的代表,并且是由不溶性铁钛熔体形成的直接证据。演化为铁-玄武岩浆。图形摘要显示省略的突出显示?存在橄榄石和磁铁矿的质地和矿物成分。 ?新界侵入体是由富铁钛的玄武岩浆形成的。 III单元中的Cr贫磁铁矿是由不混溶的富Fe-Ti熔体形成的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号