首页> 外文期刊>Environmental Research Letters >Climate engineering and the risk of rapid climate change
【24h】

Climate engineering and the risk of rapid climate change

机译:气候工程和快速气候变化的风险

获取原文
           

摘要

Recent research has highlighted risks associated with the use of climate engineering as a method of stabilizing global temperatures, including the possibility of rapid climate warming in the case of abrupt removal of engineered radiative forcing. In this study, we have used a simple climate model to estimate the likely range of temperature changes associated with implementation and removal of climate engineering. In the absence of climate engineering, maximum annual rates of warming ranged from 0.015 to 0.07?°C/year, depending on the model's climate sensitivity. Climate engineering resulted in much higher rates of warming, with the temperature change in the year following the removal of climate engineering ranging from 0.13 to 0.76?°C. High rates of temperature change were sustained for two decades following the removal of climate engineering; rates of change of 0.5 (0.3,0.1)?°C/decade were exceeded over a 20?year period with 15% (75%, 100%) likelihood. Many ecosystems could be negatively affected by these rates of temperature change; our results suggest that climate engineering in the absence of deep emissions cuts could arguably constitute increased risk of dangerous anthropogenic interference in the climate system under the criteria laid out in the United Nations Framework Convention on Climate Change.
机译:最近的研究突出了与使用气候工程作为稳定全球温度的方法有关的风险,包括在突然消除工程辐射强迫的情况下可能快速升温的可能性。在这项研究中,我们使用了一个简单的气候模型来估算与气候工程的实施和取消相关的温度变化的可能范围。在没有气候工程的情况下,取决于模型的气候敏感性,最大年升温速率为0.015至0.07?C /年。气候工程导致了更高的升温速度,气候工程取消后一年的温度变化范围为0.13至0.76°C。取消气候工程后,温度变化率持续了二十年。在20年内超过了0.5(0.3,0.1)°C /十年的变化率,可能性为15%(75%,100%)。这些温度变化速率可能会对许多生态系统产生负面影响;我们的结果表明,根据《联合国气候变化框架公约》制定的标准,没有进行大幅度减排的气候工程可以说构成对气候系统的危险人为干扰的风险增加。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号