首页>
外文期刊>Earth sciences research journal
>Determining Optimal Polypropylene Fiber Dosages In Sprayed Concrete For Mining And Civil Engineering Applications
【24h】
Determining Optimal Polypropylene Fiber Dosages In Sprayed Concrete For Mining And Civil Engineering Applications
In this study, experimental investigations were carried out on polypropylene fiber (PF), steel mesh (SM) and PF+SM reinforced shotcrete (RS) panels to evaluate performance characteristics of energy absorption and load capacity. In addition to this, material cost evaluation of shotcrete mixtures for unit energy absorption and load capacity has been given. The panel tests, along with the European specification for sprayed concrete (EFNARC), were done on 18 prismatic specimens having the same mix designs and were cured for 28 days but reinforced at varying fiber dosages. Test results indicate that in terms of unit cost performance for PF, the best dosages were 2 kg/m3 and 5 kg/m3 respectively. When compared with SM, it was determined that PF is more expensive within the range of 37 - 53%.
展开▼
机译:在这项研究中,对聚丙烯纤维(PF),钢网(SM)和PF + SM增强喷射混凝土(RS)面板进行了实验研究,以评估能量吸收和负载能力的性能特征。除此之外,还对喷射混凝土混合物的单位能量吸收和负载能力进行了材料成本评估。面板测试以及欧洲喷射混凝土规范(EFNARC)在具有相同配合比设计的18个棱柱形试样上进行,固化了28天,但在不同的纤维剂量下得到了增强。测试结果表明,就PF的单位成本性能而言,最佳剂量分别为2 kg / m3和5 kg / m3。与SM相比,可以确定PF在37-53%的范围内更昂贵。
展开▼