Now a day’s, Photo Voltaic (PV) power generation rapidly increasing. This power generation highly depending on the temperature and irradiation. When this power interface with grid through the voltage source inverter with PI controller. Its gains should be updated due to the parametric changes for the better performance. In This Work Fuzzy Controller updates the gains of the proportional integral (PI)s Controller under variable parametric conditions. the gaines of the PI Controller are updated based on the error current and change in error current through the fuzzy controller. The error current in direct and quadrature frame are the Inputs to the PI controller. The PI Controller generates the reference voltage to the pulse width modulation technique. Here reference voltage is compared with the carrier signal to generate the pulses to the 3-Ph Inverter connected to the grid. This controller has given well dynamic response with less steady state error and also given The less THD of the grid current compared to the PI and Fuzzy controller.It Is implemented and verified in MATLAB Simulink.
展开▼
