...
首页> 外文期刊>International Journal of Pharmacy and Pharmaceutical Sciences >INFLUENCE OF FORMULATION FACTORS ON THE SIZE OF NANOSTRUCTURED LIPID CARRIERS AND NANOEMULSIONS PREPARED BY HIGH SHEAR HOMOGENIZATION
【24h】

INFLUENCE OF FORMULATION FACTORS ON THE SIZE OF NANOSTRUCTURED LIPID CARRIERS AND NANOEMULSIONS PREPARED BY HIGH SHEAR HOMOGENIZATION

机译:配方因素对高剪切均质化制备的纳米结构脂质载体和微乳尺寸的影响

获取原文
   

获取外文期刊封面封底 >>

       

摘要

Objective : The main purpose of this work was to elucidate the effect of certain formulation factors on the size of nanostructured lipid carriers (NLCs) and nanoemulsions (NEs) by using high shear homogenization method. Methods : NLCs and NEs were prepared by high shear homogenization method using different liquid lipids types such as (Dermarol DCO? and Dermarol CCT?) at different concentrations. The effect of different concentration ratios of Tween 80 to Span 20 (2.5/1, 5/1, 10/1, 15/1) w/w % and different homogenization speeds (12 000, 18 000 rpm) on the resulted particle size were also studied. Results : The results revealed that the optimum NLCs and NEs resulted when we use Dermarol CCT? with a concentration of 90 % as liquid lipid and decreasing surfactant ratio to (2.5/1) w/w % with increasing the homogenization speed to 18 000 rpm. Conclusion : NLCs and NEs were successfully prepared, and from this study, it can be concluded that NLCs have the optimum particle size than Nanoemulsions.
机译:目的:这项工作的主要目的是通过高剪切均质化方法阐明某些配方因素对纳米结构脂质载体(NLC)和纳米乳剂(NEs)尺寸的影响。方法:通过高剪切均质化方法,使用不同浓度的液体脂质,例如(Dermarol DCO?和Dermarol CCT?),制备NLC和NE。 Tween 80与Span 20的不同浓度比(2.5 / 1,5/1,10/1,15/1)w / w%和不同的均化速度(12 000,18 000 rpm)对所得粒径的影响还进行了研究。结果:结果表明,当我们使用Dermarol CCT时,可获得最佳的NLC和NE。浓度为90%的液体脂质,表面活性剂比率降低至(2.5 / 1)w / w%,均质速度提高到18 000 rpm。结论:成功制备了NLCs和NEs,从这项研究可以得出结论,NLCs比纳米乳剂具有最佳的粒径。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号