...
首页> 外文期刊>International Journal of Innovative Research in Science, Engineering and Technology >Effect of Vertical Stiffness Irregularity on Multi-Storey Shear Wall-framed Structures using Response Spectrum Analysis
【24h】

Effect of Vertical Stiffness Irregularity on Multi-Storey Shear Wall-framed Structures using Response Spectrum Analysis

机译:竖向刚度不规则性对多层剪力墙框架结构的响应谱分析

获取原文
           

摘要

Urbanization has led to housing problems. This has resulted in the rise of several Multi-storey and Highrise buildings. Hence Structural Dynamics study has been steadily increasing over the years. The modern trend is towards tall and slender structures (Irregular) and innovative architecturally designed structures like the Baha?i temple (Lotus shaped). These buildings are affected by environmental factors like wind, earthquake and waterways. Millions of people world-wide annually die due to earthquakes which are responsible for billions of rupees of property damage. This has necessitated the study of Earthquake Engineering. However, study and research in the field of Irregular Buildings under seismic conditions is gaining momentum. The provision of shear wall in building has been found effective and economical. In this paper, a 10 storey building in Zone IV is presented to reduce the effect of earthquake using reinforced concrete shear wall-framed structures in the building. The results were tabulated by performing Response spectrum analysis using ETABS version 9.7.4 in the form of maximum storey displacements, base shear reactions, mode shapes and storey drifts. Effect of Irregularity was studied by creating openings in shear wall and by varying the thickness of Shear wall, along the storey?s.
机译:城市化导致住房问题。这导致了几栋多层和高层建筑的兴起。因此,多年来结构动力学研究一直在稳步增长。现代趋势是走向高大细长的结构(不规则)和创新的建筑设计结构,例如Baha?i神庙(莲花形)。这些建筑物受风,地震和水道等环境因素的影响。全世界每年有数百万人死于地震,这些地震造成数十亿卢比的财产损失。这就需要对地震工程进行研究。然而,在地震条件下的不规则建筑物领域的研究和研究正获得发展。已经发现在建筑物中设置剪力墙是有效且经济的。在本文中,提出了IV区的一幢10层高的建筑物,以使用建筑物中的钢筋混凝土剪力墙框架结构来减少地震的影响。通过使用ETABS版本9.7.4进行响应光谱分析以最大层位移,基础剪切反应,模态形状和层漂移的形式将结果列表化。研究了不规则性的影响,方法是在剪力墙中创建开口,并沿层高改变剪力墙的厚度。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号