首页> 外文期刊>Atmospheric Chemistry and Physics Discussions >Microphysical processing of aerosol particles in orographic clouds
【24h】

Microphysical processing of aerosol particles in orographic clouds

机译:地形云中气溶胶颗粒的微物理处理

获取原文
           

摘要

pstrongAbstract./strong An explicit and detailed treatment of cloud-borne particles allowing for the consideration of aerosol cycling in clouds has been implemented into COSMO-Model, the regional weather forecast and climate model of the Consortium for Small-scale Modeling (COSMO). The effects of aerosol scavenging, cloud microphysical processing and regeneration upon cloud evaporation on the aerosol population and on subsequent cloud formation are investigated. For this, two-dimensional idealized simulations of moist flow over two bell-shaped mountains were carried out varying the treatment of aerosol scavenging and regeneration processes for a warm-phase and a mixed-phase orographic cloud. brbr The results allowed us to identify different aerosol cycling mechanisms. In the simulated non-precipitating warm-phase cloud, aerosol mass is incorporated into cloud droplets by activation scavenging and released back to the atmosphere upon cloud droplet evaporation. In the mixed-phase cloud, a first cycle comprises cloud droplet activation and evaporation via the Wegenera??Bergerona??Findeisen (WBF) process. A second cycle includes below-cloud scavenging by precipitating snow particles and snow sublimation and is connected to the first cycle via the riming process which transfers aerosol mass from cloud droplets to snowflakes. In the simulated mixed-phase cloud, only a negligible part of the total aerosol mass is incorporated into ice crystals. Sedimenting snowflakes reaching the surface remove aerosol mass from the atmosphere. The results show that aerosol processing and regeneration lead to a vertical redistribution of aerosol mass and number. Thereby, the processes impact the total aerosol number and mass and additionally alter the shape of the aerosol size distributions by enhancing the internally mixed/soluble Aitken and accumulation mode and generating coarse-mode particles. Concerning subsequent cloud formation at the second mountain, accounting for aerosol processing and regeneration increases the cloud droplet number concentration with possible implications for the ice crystal number concentration./p.
机译:> >摘要。考虑到云中的气溶胶循环,对云中颗粒物进行了明确而详细的处理,现已应用于COSMO模型,该地区财团的区域天气预报和气候模型。小规模建模(COSMO)。研究了气溶胶清除,云微物理过程和再生对云蒸发对气溶胶种群和随后的云形成的影响。为此,对两个钟形山上的湿润气流进行了二维理想化模拟,改变了暖相和混合相地形云对气溶胶清除和再生过程的处理方式。 结果使我们能够确定不同的气溶胶循环机制。在模拟的非降水暖相云中,通过清除活化气溶胶物质将其合并到云滴中,并在云滴蒸发后释放回大气中。在混合相云中,第一个循环包括通过Wegenera ?? Bergerona ?? Findeisen(WBF)过程进行的云滴活化和蒸发。第二个循环包括通过沉淀雪粒和升华降雪来清除云层,并通过边沿工艺连接到第一个循环,该过程将气溶胶质量从云滴转移到雪花。在模拟的混合相云中,总气溶胶质量中只有可忽略的一部分被合并到冰晶中。到达表面的沉淀雪花将大气中的气溶胶团块清除。结果表明,气溶胶的处理和再生导致气溶胶质量和数量的垂直重新分布。因此,这些过程会影响总气溶胶数量和质量,并通过增强内部混合/可溶的Aitken和累积模式并生成粗模式颗粒来更改气溶胶尺寸分布的形状。关于第二座山上随后的云形成,考虑到气溶胶处理和再生,会增加云滴数浓度,可能对冰晶数浓度有影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号