The Influence of Heat Treatment on the Magnetization Process (within Strong Magnetic Fields) for the Alloy: Fe61Co10Y8Cu1B20

摘要

Samples of Fe61Co10Y8Cu1B20 alloy were investigated in the ‘approach to ferromagnetic saturation’ region by using the Kronmüller method. The amorphous material was obtained by radially cooling the molten alloy under a protective atmosphere of inert gas. Following this manufacturing process, static magnetic hysteresis loops were measured for samples, before and after a controlled isothermal annealing process, using a LakeShore vibrating magnetometer (VSM). From analysis of the primary magnetization curves, the distribution of structural defects and the average exchange distance for these defects were determined.