There has been an increasing amount of waste concrete generated in recent years, which has made recycling more important. Waste concrete is generally recycled as recycled aggregates, and many studies have been conducted to seek ways to improve their quality. Such quality improvement processes has led to the generation of byproducts such as waste concrete powder, which needs to be recycled efficiently based on further research. Accordingly, this study was conducted with the aim to use waste concrete powder (WCP) to substitute silica powder in the manufacturing of the extrusion concrete panels in cases where high SiO 2 content is not a requirement. The results of this study showed a negative correlation between flexural strength and silica powder-WCP substitution ratio. For example, 50% substitution resulted in a product that satisfied the required flexural strength over 14 MPa as stipulated by the Korean Industrials Standards, and it gave rise to properties such as specific gravity, absorption ratio, length change, thermal conductivity, and fire-resistance that were similar to those of plain specimens. Based on these results, it was deemed that it would be possible to use WCP as an alternative material in place of siliceous fillers in cases where high-purity is not required.
展开▼
