首页> 外文期刊>Aerosol and Air Quality Research >Application of Trajectory Clustering and Source Apportionment Methods for Investigating Trans-Boundary Atmospheric PM10 Pollution
【24h】

Application of Trajectory Clustering and Source Apportionment Methods for Investigating Trans-Boundary Atmospheric PM10 Pollution

机译:轨迹聚类和源分配方法在跨边界大气PM10污染调查中的应用

获取原文
           

摘要

A modeling framework was proposed to investigate the impact of trans-boundary air pollutant transport on regional air quality. This was based on a combination of the HYSPLIT trajectory model, the CAMx air quality model, and the MM5 meteorological model. The examination of atmospheric PM10 pollution in Guangzhou within the Pearl River Delta (PRD) region of southern China was used as a case study. The HYSPLIT and MM5 models were used to qualitatively identify the dominant PM10 pollutant transport pathways that led to PM10 pollution events in Guangzhou, with five clusters of air mass trajectories being examined. The emission source contribution through each transport pathway to Guangzhou’s PM10 concentration was then quantified using a MM5-CAMx modeling system. The results illustrated that the trans-boundary PM10 transport played a critical role in the formation of PM10 pollution events in Guangzhou, with a mean contribution ratio of nearly 49%. In particular, two air mass trajectory clusters that originated from Guangzhou’s surrounding regions were found to be the main pollutant transport pathways, and three surrounding cities (Foshan, Dongguan and Huizhou) had a total emission contribution of nearly 30% to Guangzhou’s PM10 concentration through these two pathways. The emissions from these three cities also accounted for 70 to 94% of the total trans-boundary contributions from Guangzhou’s nine surrounding cities through the five transport pathways. As a result, in order to improve Guangzhou’s air quality, coordinated effort is required to reduce emissions in both Guangzhou itself and its three surrounding cities. It is expected that the presented modeling approach can be applied to air quality studies in many other regions.
机译:提出了一个建模框架,以研究跨界空气污染物的运输对区域空气质量的影响。这是基于HYSPLIT轨迹模型,CAMx空气质量模型和MM5气象模型的组合。以中国南方的珠江三角洲(PRD)区域内广州的PM10大气污染检查为例。使用HYSPLIT和MM5模型定性地确定了导致广州PM10污染事件的主要PM10污染物运输途径,并研究了五组空气质量轨迹。然后,使用MM5-CAMx模型系统量化通过每种运输途径对广州PM10浓度产生的排放源的贡献。结果表明,跨境PM10的运输在广州PM10污染事件的形成中起着关键作用,平均贡献率接近49%。特别是,发现两个源自广州周边地区的空气轨迹轨迹是主要的污染物传输路径,通过这些分析,三个周边城市(佛山,东莞和惠州)对广州PM10浓度的总排放贡献近30%。两条途径。这三个城市的排放量也占广州周边九个城市通过五种运输途径的跨境排放总量的70%至94%。因此,为了改善广州的空气质量,需要做出协调一致的努力,以减少广州及其周边三个城市的排放。预期所提出的建模方法可以应用于许多其他地区的空气质量研究。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号