首页> 外文期刊>Crystal Structure Theory and Applications >An Investigation of PLD-Deposited Barium Strontium Titanate (BaxSr1-xTiO3) Thin Film Optical Properties
【24h】

An Investigation of PLD-Deposited Barium Strontium Titanate (BaxSr1-xTiO3) Thin Film Optical Properties

机译:PLD沉积钛酸锶钡(BaxSr1-xTiO3)薄膜光学性能的研究

获取原文
           

摘要

Reflectance and transmittance parameters of pulsed laser deposited barium strontium titanate (BST) were investigated using spectrophotometric methods. Three stoichiometries consisting of BaxSr1-xTiO3 (x = 0.30, 0.40, 0.50) were deposited on glass substrates using oxygen partial pressures of 1.3 Pa ± 0.13 Pa at 500oC. Subsequently, the measured optical parameters were employed to determine the refractive index (n), extinction coefficient (k), optical conductivity (σ), absorption coefficient (α) and optical bandgap (Eg) using swept spectra in the ultraviolet, visible and near-infrared range (200 nm - 1100 nm) as these have not been reported in the literature. The calculated parameters for Ba0.4Sr0.6TiO3 are reported in this experimental work. Minimal differences in the transmittance have been observed at the visible band edges when comparing each stoichiometry. Sharp cutoffs were observed at the bands edges and strong absorbance in the 200 nm - 300 nm band as attributed to the crystal structure based upon the oxygen partial pressure during the deposition process.
机译:采用分光光度法研究了脉冲激光沉积钛酸锶钡(BST)的反射率和透射率参数。在500oC下,使用1.3 Pa±0.13 Pa的氧分压,将由BaxSr1-xTiO3组成的三种化学计量比(x = 0.30、0.40、0.50)沉积在玻璃基板上。随后,使用测得的光学参数,通过紫外,可见光和近距离扫描光谱确定折射率(n),消光系数(k),电导率(σ),吸收系数(α)和光带隙(Eg)。 -红外范围(200 nm-1100 nm),因为文献中尚未报道。 Ba0.4Sr0.6TiO3的计算参数已记录在该实验工作中。当比较每个化学计量时,在可见带边缘观察到透射率的最小差异。基于沉积过程中的氧分压,归因于晶体结构,在条带边缘观察到了锐利的截止,并且在200 nm-300 nm的条带中有强吸收。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号