...
首页> 外文期刊>Computer Assisted Surgery >The accuracy of 3D image navigation with a cutaneously fixed dynamic reference frame in minimally invasive transforaminal lumbar interbody fusion
【24h】

The accuracy of 3D image navigation with a cutaneously fixed dynamic reference frame in minimally invasive transforaminal lumbar interbody fusion

机译:微创经椎间孔腰椎椎间融合术中采用皮肤固定动态参照系进行3D图像导航的准确性

获取原文
           

摘要

Objective: In contrast to preoperative image-based 3D navigation systems, which require surgeon-dependent registration, an intraoperative cone-beam computed tomography (cb-CT) image-based 3D navigation system allows automatic registration during the acquisition of 3D images intraoperatively. Thus, the need for spinal exposure for point matching is obviated, making a cb-CT image-based navigation system ideal for use in minimally invasive spinal procedures. Conventionally, the dynamic reference frame (DRF) is mounted to an adjacent spinous process or iliac bone through a separate incision. However, the close proximity of the DRF to the surgical area may result in its interfering with the surgical procedure or causing streak artifacts on the navigation images. Cutaneous placement of the DRF overlying the sacral hiatus is one possible solution to these problems, but such a placement does not provide a solid bony fixation point and is distant from the surgical area, both of which factors may hinder the accuracy of the navigation. The purpose of this study was to evaluate the accuracy of a novel idea for DRF placement in a series of mini-open transforaminal lumbar interbody fusion (TLIF) procedures performed with intraoperative cb-CT image-based 3D navigation.Methods: From June 2009 to December 2009, 20 patients underwent mini-open TLIF for a total 82 pedicle screws placed in the lumbar spine with cutaneous placement of the DRF overlying the sacral hiatus. The pedicle screws were inserted under navigational guidance using cb-CT data acquired intraoperatively with a Medtronic O-arm. Screw positions were subsequently checked with a final intraoperative cb-CT scan. Nineteen patients underwent single-level fusion (8 at L4–5, 6 at L5–S1, 4 at L3–4, and 1 at L2–3) and one patient underwent two-level fusion (from L3–5).Results: There were 4 (4.9%) pedicle perforations greater than 2?mm out of the 82 pedicle screw insertions in the 20 patients. Two of these breached screws were repositioned and confirmed to be in place with a final intraoperative cb-CT. There were no complications of neural injury associated with these perforations.Conclusion: A cutaneously mounted DRF overlying the sacral hiatus provides accuracy in intraoperative 3D image guided navigation for mini-open TLIF that is comparable to that obtained in other reported series using a fixed bony attachment point for the DRF.
机译:目的:与术前基于图像的3D导航系统需要外科医生依赖的注册相反,术中基于锥形束计算机断层扫描(cb-CT)图像的3D导航系统允许在术中采集3D图像期间自动注册。因此,消除了用于点匹配的脊柱暴露的需要,使得基于cb-CT图像的导航系统非常适合用于微创脊柱手术。按照惯例,动态参考框架(DRF)通过单独的切口安装到相邻的棘突或骨上。但是,DRF与手术区域的紧密邻近可能会导致其干扰手术过程或在导航图像上造成条纹伪影。 RF骨裂孔上方DRF的皮肤放置是解决这些问题的一种可能方法,但这种放置不能提供牢固的骨固定点,并且远离手术区域,这两个因素都可能妨碍导航的准确性。这项研究的目的是评估在基于术中cb-CT图像的3D导航进行的一系列微型开放式经椎间孔腰椎椎间融合术(TLIF)中进行DRF放置的新思路的准确性。方法:从2009年6月2009年12月,对20例患者进行了微型开放式TLIF,将总共82根椎弓根螺钉放置在腰椎中,DRF皮肤放置在s骨裂孔上方。使用Medtronic O型臂在术中获取的cb-CT数据在导航指导下插入椎弓根螺钉。随后用最终的术中cb-CT扫描检查螺钉位置。 19例患者进行了单级融合(L4-5时8例,L5–S1时6例,L3-4时4例,L2-3时1例),而1例患者进行了2级融合(来自L3–5)。结果: 20例患者的82个椎弓根螺钉插入物中,有4个(4.9%)椎弓根穿孔大于2?mm。重新定位其中两个断裂的螺钉,并确认其已在最终的术中cb-CT中固定。结论:mini裂上方覆盖皮肤的DRF可在术中3D图像引导下进行微型开放TLIF导航,其准确性与其他报道的使用固定骨附件的系列相当。 DRF的点。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号