首页> 外文期刊>Ciencia Florestal >Influência das características anat?micas e do teor de extrativos totais da madeira de Eucalyptus grandis W. Hill ex Maiden na qualidade da colagem
【24h】

Influência das características anat?micas e do teor de extrativos totais da madeira de Eucalyptus grandis W. Hill ex Maiden na qualidade da colagem

机译:桉树原木的解剖特征和总提取量对其结合质量的影响

获取原文
           

摘要

http://dx.doi.org/10.5902/198050987561 The study aimed to anatomically characterize and to quantify the total extractives in different positions of the log of Eucalyptus grandis W. Hill ex Maiden with 18 years of age and to assess their influence on the shear strength and percentage of wood failure in adhesive bonded joints with thermosetting resorcinol-formaldehyde. Histological slides were prepared for an anatomical study and determined the total extractive content. The preparation of bonded joints was made according to ASTM D 2339-98(2000). It was used the correlation coefficient of Pearson, 1% probability by t test to evaluate the correlation between the anatomical and extractives content with the quality of the glued joints. It was found that there was a correlation between the shear strength with the following characteristics: vessel diameter, wall width, length and width of the fiber, the width of the radius and total extractives content. For the percentage of wood failure, there was a correlation between this with the following characteristics: the frequency of vessels, thickness of the heat of fiber, and high frequency of lightning. Both the radial direction as in the longitudinal direction of the logs there was change in the values found for the measurement of the anatomical elements, the total amount of extractives, the shear test strength and the percentage of wood failure.
机译:http://dx.doi.org/10.5902/198050987561这项研究旨在对18岁的桉树W. Hill ex Maiden原木的不同位置进行解剖鉴定和量化,并对它们的影响进行评估热固间苯二酚-甲醛的胶接接头的剪切强度和木材破坏百分比。准备组织切片用于解剖研究,并确定总提取物含量。根据ASTM D 2339-98(2000)制备粘合接头。通过t检验,使用Pearson的相关系数和1%的概率来评估解剖和提取物含量与胶合关节质量之间的相关性。发现剪切强度与以下特征之间具有相关性:容器直径,壁宽度,纤维的长度和宽度,半径的宽度和总提取物含量。对于木材破坏的百分比,这与以下特征之间存在相关性:容器的频率,纤维热的厚度和闪电的频率。沿径向和沿木材原木的纵向方向变化时,测得的用于解剖元素的值,提取物的总量,剪切试验强度和木材破坏的百分比均发生了变化。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号