首页> 外文期刊>Chemistry central journal >Catalysis over zinc-incorporated berlinite (ZnAlPO4) of the methoxycarbonylation of 1,6-hexanediamine with dimethyl carbonate to form dimethylhexane-1,6-dicarbamate
【24h】

Catalysis over zinc-incorporated berlinite (ZnAlPO4) of the methoxycarbonylation of 1,6-hexanediamine with dimethyl carbonate to form dimethylhexane-1,6-dicarbamate

机译:含锌的贝氏石(ZnAlPO 4 )催化1,6-己二胺与碳酸二甲酯的甲氧基羰基化反应形成1,6-二氨基甲酸二甲酯

获取原文
       

摘要

Background The alkoxycarbonylation of diamines with dialkyl carbonates presents promising route for the synthesis of dicarbamates, one that is potentially 'greener' owing to the lack of a reliance on phosgene. While a few homogeneous catalysts have been reported, no heterogeneous catalyst could be found in the literature for use in the synthesis of dicarbamates from diamines and dialkyl carbonates. Because heterogeneous catalysts are more manageable than homogeneous catalysts as regards separation and recycling, in our study, we hydrothermally synthesized and used pure berlinite (AlPO4) and zinc-incorporated berlinite (ZnAlPO4) as heterogeneous catalysts in the production of dimethylhexane-1,6-dicarbamate from 1,6-hexanediamine (HDA) and dimethyl carbonate (DMC). The catalysts were characterized by means of XRD, FT-IR and XPS. Various influencing factors, such as the HDA/DMC molar ratio, reaction temperature, reaction time, and ZnAlPO4/HDA ratio, were investigated systematically. Results The XRD characterization identified a berlinite structure associated with both the AlPO4 and ZnAlPO4 catalysts. The FT-IR result confirmed the incorporation of zinc into the berlinite framework for ZnAlPO4. The XPS measurement revealed that the zinc ions in the ZnAlPO4 structure possessed a higher binding energy than those in ZnO, and as a result, a greater electron-attracting ability. It was found that ZnAlPO4 catalyzed the formation of dimethylhexane-1,6-dicarbamate from the methoxycarbonylation of HDA with DMC, while no activity was detected on using AlPO4. Under optimum reaction conditions (i.e. a DMC/HDA molar ratio of 8:1, reaction temperature of 349 K, reaction time of 8 h, and ZnAlPO4/HDA ratio of 5 (mg/mmol)), a yield of up to 92.5% of dimethylhexane-1,6-dicarbamate (with almost 100% conversion of HDA) was obtained. Based on these results, a possible mechanism for the methoxycarbonylation over ZnAlPO4 was also proposed. Conclusion As a heterogeneous catalyst ZnAlPO4 berlinite is highly active and selective for the methoxycarbonylation of HDA with DMC. We propose that dimethylhexane-1,6-dicarbamate is formed via a catalytic cycle, which involves activation of the DMC by a key active intermediate species, formed from the coordination of the carbonyl oxygen with Zn(II), as well as a reaction intermediate formed from the nucleophilic attack of the amino group on the carbonyl carbon.
机译:背景技术二胺与碳酸二烷基酯的烷氧基羰基化为合成二氨基甲酸酯提供了有希望的途径,由于缺乏对光气的依赖,该途径可能“更绿色”。尽管已经报道了几种均相催化剂,但是在文献中找不到用于从二胺和碳酸二烷基酯合成二氨基甲酸酯的非均相催化剂。由于在分离和回收方面,非均相催化剂比均相催化剂更易于管理,因此,在我们的研究中,我们水热合成并使用了纯柏林铁(AlPO4)和掺锌的柏林铁(ZnAlPO4)作为二甲基己烷-1,6-生产中的非均相催化剂。 1,6-己二胺(HDA)和碳酸二甲酯(DMC)中的二氨基甲酸酯。通过XRD,FT-IR和XPS对催化剂进行了表征。系统研究了影响HDA / DMC摩尔比,反应温度,反应时间和ZnAlPO4 / HDA比等各种影响因素。结果XRD表征确定了与AlPO4和ZnAlPO4催化剂都相关的硅藻土结构。 FT-IR结果证实了将锌掺入到ZnAlPO4的berlinite骨架中。 XPS测量显示,ZnAlPO4结构中的锌离子具有比ZnO中更高的结合能,因此具有更大的电子吸引能力。发现ZnAlPO4催化了DMC对HDA的甲氧基羰基化作用形成1,6-二氨基甲酸酯二甲基己烷的生成,而使用AlPO4则未发现活性。在最佳反应条件下(即DMC / HDA摩尔比为8:1,反应温度为349 K,反应时间为8 h,ZnAlPO4 / HDA比率为5(mg / mmol)),产率最高可达92.5%得到1,6-二氨基甲酸二甲基己烷酯(几乎100%的HDA转化率)。基于这些结果,还提出了在ZnAlPO4上进行甲氧基羰基化的可能机理。结论ZnAlPO4 berlinite作为非均相催化剂具有很高的活性,对DMC对HDA的甲氧基羰基化具有选择性。我们建议通过催化循环形成二甲基己烷-1,6-二氨基甲酸酯,该循环涉及通过羰基氧与Zn(II)的配位反应形成的关键活性中间体物种激活DMC。由羰基碳上氨基的亲核攻击形成。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号