Treatment of the surgical neck fracture of the humerus with a novel external fixator in the elderly with osteoporosis: biomechanical analysis

摘要

No consensus exists on the treatment of proximal humerus fractures, especially in the elderly patients with osteoporosis. This study was aimed to evaluate the biomechanical characteristics of a novel external fixator in treating two-part surgical neck fracture of the proximal humerus in the elderly patients with osteoporosis. Sixteen female elderly humeral shaft specimens with osteoporosis were randomized into 2 groups. Models with the surgical neck two-part fracture of the proximal humerus were built, in which a novel external fixator (test group) and a clover plate (control group) were applied separately. In the test group, the fracture was firstly fixed with intersection pinning using 3 Schanz pins (3.5?mm), followed by the novel external fixation frame. In the control group, a clover plate and 6 cortical bone screws were applied. Biomechanical testing of the specimens was performed to assess the resistance to load bearing and torsional stress. The parameters of the two groups were compared using independent t-test. Ultimate bearing capacity and load bearing at different parts with the humerus rotation were higher (P??0.05) in the external fixator group (145.16?±?17.42?N and 140?N respectively) than those in the plate group (120.21?±?13.15?N and 69.63?±?25.16–90.78?±?17.18?N respectively). As for resistance to torsional stress, plate’s torque fluctuated between 1?Nm and 5?Nm, while the external fixator’s torque values were more evenly (P??0.01) distributed with the fluctuation within 1?Nm. In the fixation of two-part humeral fracture in elderly patients with osteoporosis, the new external fixator seemed to be superior to plate fixation in load bearing and resistance to torsional stress.