首页> 外文期刊>Desalination and water treatment >Identifying the major pollution sources and pollution loading status of Qiputang River in Taihu Lake basin of China
【24h】

Identifying the major pollution sources and pollution loading status of Qiputang River in Taihu Lake basin of China

机译:识别中国太湖流域奇普塘河的主要污染源和污染负荷状况

获取原文
获取原文并翻译 | 示例
       

摘要

A proper understanding on the pollution sources and pollution loads of a water body is essential for its pollution control. Taihu Lake basin of China is an environmentally sensitive area. Currently, most of the river systems in this region are severely polluted, but information about these rivers is still lacking. Here, we present a comprehensive investigation into the pollution status of a typical river in Taihu Lake basin, Qiputang River, by using chemical oxygen demand (COD) and ammonia (NH_4~+-N) as two major evaluation indexes. The major pollution sources, actual pollution loads, as well as the expected pollution carrying capacity were estimated via model simulation and calculation. The results show that the orders of pollution load are: for COD, urban domestic non-point source (NPS) > industrial NPS > wastewater treatment plant (WWTP) effluent > rural domestic NPS > agriculture NPS > livestock NPS; for NH4-N, agriculture NPS > urban domestic NPS > WWTP effluent > industrial NPS > rural domestic NPS > livestock NPS. Thus, urban domestic NPS, industrial NPS, agriculture NPS and WWTP effluents are the major pollution sources of the river, accounting for 84.17% of the total COD load and 87.1% of the total NH4-N load. Pollution overloading is severe for the river, especially for No. 4~ sections where the overloading of COD and NH4-N reached up to 748.1 and 422.3%, respectively. Thus, more future efforts of pollution control should be devoted to these sources and areas. This work presents a simple and useful way to investigate into the pollution situation of complex river systems, and offers valuable information on river pollution situation of Taihu Basin, which may help policy-makers and planners in implementing more effective and practical pollution control strategies.
机译:对水体的污染源和污染负荷的正确理解对于控制其污染至关重要。中国的太湖流域是一个环境敏感地区。目前,该地区的大多数河流系统都受到严重污染,但仍缺乏有关这些河流的信息。在这里,我们以化学需氧量(COD)和氨(NH_4〜+ -N)为两个主要评价指标,对奇普塘河太湖流域典型河流的污染状况进行了全面调查。通过模型仿真和计算,估算出主要污染源,实际污染负荷以及预期污染承载能力。结果表明,污染负荷的顺序为:对于COD,城市家庭面源(NPS)>工业NPS>废水处理厂(WWTP)出水>农村家庭NPS>农业NPS>牲畜NPS;对于NH4-N,农业NPS>城市家庭NPS>污水处理厂废水>工业NPS>农村家庭NPS>牲畜NPS。因此,城市生活NPS,工业NPS,农业NPS和污水处理厂废水是河流的主要污染源,分别占COD总量的84.17%和NH4-N总量的87.1%。河流的污染超负荷严重,特别是在4〜段,其中COD和NH4-N的超负荷分别达到了748.1%和422.3%。因此,今后在污染控制方面应作出更多努力,以应对这些污染源和污染地区。这项工作为调查复杂河流系统的污染状况提供了一种简单而有用的方法,并为太湖流域的河流污染状况提供了有价值的信息,这可能有助于政策制定者和规划者实施更有效和实际的污染控制策略。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号