首页> 外文期刊>Desalination and water treatment >Electrospun nanofibrous composite membranes of chitosan/polyvinyl alcohol-polyacrylonitrile: preparation, characterization, and performance
【24h】

Electrospun nanofibrous composite membranes of chitosan/polyvinyl alcohol-polyacrylonitrile: preparation, characterization, and performance

机译:壳聚糖/聚乙烯醇-聚丙烯腈电纺纳米纤维复合膜的制备,表征和性能

获取原文
获取原文并翻译 | 示例
       

摘要

In the present research, double-layer chitosan (CS)/polyvinyl alcohol (PVA) polyacrylonitrile (PAN) and single-layer PAN nanofibrous membranes were prepared by electrospinning method. The blend weight ratio of CS/PVA and concentration of PAN solutions were varied to obtain the optimal electrospun mats in terms of fiber diameter, porosity, and pore size. The 50/50 CS/PVA was determined as the optimal top layer with respect to the obtained results. Moreover, the electrospun nanofibrous membranes were characterized by wastewater treatment. The maximum rejection values of chemical oxygen demand (COD), total dissolved solids (TDS), and turbidity using CS/PVA-PAN nanofibrous composite membranes were 61.14, 34.6, and 99.8%, respectively. Such findings imply that the electrospun nanofibrous composite membranes can be used as appropriate membranes for pretreatment process.
机译:本研究通过电纺丝法制备了双层壳聚糖(CS)/聚乙烯醇(PVA)聚丙烯腈(PAN)和单层PAN纳米纤维膜。在纤维直径,孔隙率和孔径方面,改变CS / PVA的混合重量比和PAN溶液的浓度以获得最佳的电纺垫。相对于所得结果,将50/50 CS / PVA确定为最佳顶层。此外,电纺纳米纤维膜的特征在于废水处理。使用CS / PVA-PAN纳米纤维复合膜的化学需氧量(COD),总溶解固体(TDS)和浊度的最大截留值分别为61.14、34.6和99.8%。这些发现暗示了电纺纳米纤维复合膜可以用作预处理过程的合适膜。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号