首页> 外文期刊>Dental materials >Effect of Pretreatment and Activation Mode on the Interfacial Adaptation of Nanoceramic Resin Inlay and Self-adhesive Resin Cement
【24h】

Effect of Pretreatment and Activation Mode on the Interfacial Adaptation of Nanoceramic Resin Inlay and Self-adhesive Resin Cement

机译:预处理和活化模式对纳米母树脂嵌体界面适应和自粘树脂水泥的影响

获取原文
获取原文并翻译 | 示例
           

摘要

Objectives. The first objective of this study was to determine if the luting material used for resin nanoceramic inlay affects interfacial adaptation. The second was to investigate whether pretreatment and the adhesive curing method before cementation affects interfacial adaptation. The final objective was to compare activation modes of luting material.Methods. Class I cavities were prepared on extracted human third molars. Resin nanoceramic inlays were fabricated using Lava Ultimate CAD/CAM block (3 M). For the control groups, inlays were cemented using Panavia VS (Kuraray Noritake). For the experimental groups, teeth were randomly divided into five experimental groups with four subgroups using different self-adhesive cements (SACs). Cement in Group I was dual-cured without pretreatment. In Group II, the cement was dual-cured after polyacrylic acid treatment of the tooth cavity. In Groups III and IV, the cement was dual-cured after universal dentin adhesive treatment with pre-cure and co-cure methods. In Group V, the inlay was cemented in self-cure mode. After thermocycling, interfacial adaptation at the inlay-tooth interface was measured using swept-source optical coherence tomography (SS-OCT) imaging. Finally, polymerization shrinkage strain of the luting material was measured and compared.Results. Interfacial adaptation differed depending on the luting material. After application of a universal adhesive, some subgroups showed improved interfacial adaptation. Interfacial adaptation and polymerization shrinkage strain differed significantly depending on activation mode.Significance. Interfacial adaptation for a resin nanoceramic inlay can differ according to the type of SAC and activation mode. For some SACs, application of a universal adhesive before cementation improves interfacial adaptation. (C) 2020 The Academy of Dental Materials. Published by Elsevier Inc. All rights reserved.
机译:目标。本研究的第一个目的是确定用于树脂纳米陶瓷嵌体的饲料材料是否影响界面适应。第二个是在胶粘剂之前研究预处理和粘合剂固化方法是否会影响界面适应。最终目标是比较Luting Material的激活模式。方法。 I级腔准备在提取的人的第三磨牙上制备。使用熔岩终极CAD /凸轮块(3米)制造树脂纳米陶瓷嵌体。对于对照组,使用Panavia Vs(Kuraray诺特克)巩固镶嵌物。对于实验组,牙齿随机分为五个实验组,使用不同的自粘水泥(囊)。在群中的水泥我是双重治愈而没有预处理。在第II族中,在牙齿腔的聚丙烯酸处理后水泥是双固化的。在III族和IV组中,在具有预固化和共同固化方法的通用牙本质粘合剂处理后,水泥是双固化的。在V组中,镶嵌以自我固化模式粘合。在热循环后,使用扫描源光学相干断层扫描(SS-OCT)成像测量嵌入式齿界面处的界面适应。最后,测量并进行比较延伸材料的聚合收缩菌株。结果。界面自适应根据戒备材料而不同。在施加通用粘合剂之后,一些亚组显示出改善的界面适应性。界面适应和聚合收缩应变根据激活模式而显着不同。重要性。树脂纳米纳米镶嵌物的界面适应可以根据囊和活化模式的类型而不同。对于一些囊,在胶结之前,在胶结之前应用通用粘合剂改善了界面适应。 (c)2020牙科材料学院。由elsevier Inc.出版的所有权利保留。

著录项

  • 来源
    《Dental materials》 |2020年第9期|1170-1182|共13页
  • 作者单位

    Catholic Univ Korea Coll Med St Vincent Hosp Dept Conservat Dent 93 Jungbu Daero Suwon Gyeonggi Do South Korea;

    Okayama Univ Dept Operat Dent Kita Ku 2-5-1 Shikata Cho Okayama 7008525 Japan|Tokyo Med & Dent Univ Dept Cariol & Operat Dent Bunkyo Ku 1-5-45 Yushima Tokyo 1130034 Japan;

    Univ Washington Sch Dent Dept Restorat Dent 1959 NE Pacific St B162 Seattle WA 98195 USA;

    Tokyo Med & Dent Univ Dept Cariol & Operat Dent Bunkyo Ku 1-5-45 Yushima Tokyo 1130034 Japan;

    Seoul Natl Univ Natl Dent Care Ctr Persons Special Needs Dept Conservat Dent Dent Res Inst Dent Hosp Sch Dent 101 Daehak Ro Seoul 08030 South Korea;

    Yonsei Univ Coll Dent Oral Sci Res Ctr Dept Conservat Dent 50 Yonsei Ro Seoul South Korea;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);美国《化学文摘》(CA);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    interfacial adaptation; nanoceramic resin inlay; self-adhesive resin cement; pretreatment; activation mode; self-curing potential;

    机译:界面适应;纳米陶瓷树脂镶嵌;自粘树脂水泥;预处理;激活模式;自我固化潜力;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号