首页> 外文期刊>Consumer Electronics, IEEE Transactions on >Automatic black box testing of television systems on the final production line
【24h】

Automatic black box testing of television systems on the final production line

机译:在最终生产线上对电视系统进行自动黑匣子测试

获取原文
获取原文并翻译 | 示例
           

摘要

The current verification methodologies on the final production line in digital television industry require a significant amount of manual work in connecting and disconnecting the television set to and from signal sources and verifying the correctness and quality of image shown on the TV screen. This manual work slows down the production and increases the cost of a final production line. This paper proposes an automatic system which will perform all required verification steps on the final production line such that manual work will be minimized, speed of the production will significantly increase and the cost of the final production line will decrease. The proposed final production line uses the camera to capture the image shown on the TV screen which improves the earlier solution with the grabber to allow verification of the image quality as seen by the user. The proposed system consists of: (1) TV set being verified, (2) camera to capture the content on the TV screen, (3) signal generator, (4) test monitoring system and (5) PC which runs the algorithm for extraction of the TV screen content and comparison with the referent content. The proposed algorithm uses the blockbased normalized cross-correlation to compare captured and referent content. The proposed testing methodology divides the verification on the final production line in three steps: (1) setup phase, during which the TV set is brought and connected to the signal sources and test monitoring system, (2) execution phase which captures the content on the TV screen and runs the PC algorithm and (3) test report phase which reports the pass/fail result of the test in the test monitoring system. The experimental results of the block-based comparison method show a better sensitivity to small differences than the non-block-based method. The time required for verification step increased by a factor of 5 when using the automatic approach on the final production line instead of a manual one.
机译:在数字电视行业的最终生产线上,当前的验证方法需要大量的人工工作,以将电视机与信号源连接和断开以及验证电视屏幕上显示的图像的正确性和质量。手动操作会减慢生产速度并增加最终生产线的成本。本文提出了一种自动系统,该系统将在最终生产线上执行所有必需的验证步骤,从而最大程度地减少手工工作,显着提高生产速度,并降低最终生产线的成本。拟议的最终生产线使用相机捕获电视屏幕上显示的图像,从而改进了使用采集卡的早期解决方案,从而可以验证用户看到的图像质量。拟议的系统包括:(1)待验证的电视机,(2)摄像机捕获电视屏幕上的内容,(3)信号发生器,(4)测试监视系统和(5)运行提取算法的PC电视屏幕内容的比较以及与参考内容的比较。所提出的算法使用基于块的归一化互相关来比较捕获的内容和参考内容。所提出的测试方法将对最终生产线的验证分为三个步骤:(1)设置阶段,在此阶段,将电视机带到并连接到信号源和测试监视系统,(2)执行阶段,在此阶段捕获内容在电视屏幕上运行PC算法,以及(3)测试报告阶段,该阶段报告测试监视系统中测试的通过/失败结果。与非基于块的方法相比,基于块的比较方法的实验结果显示出对较小差异的敏感性更高。在最终生产线上使用自动方法而不是手动方法时,验证步骤所需的时间增加了5倍。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号