...
首页> 外文期刊>Construction and Building Materials >Determination of optimum mixture design method for self-compacting concrete: Validation of method with experimental results
【24h】

Determination of optimum mixture design method for self-compacting concrete: Validation of method with experimental results

机译:自压力混凝土最佳混合设计方法的测定:实验结果验证方法

获取原文
获取原文并翻译 | 示例
           

摘要

This paper describes the mixture design method for self-compacting concrete (SCC) while making use of supplementary cementitious materials (SCMs) for the design of concrete mixture to assess early age strength and self-compactability. The proposed procedure "strength-based mixture design method" also makes use of packing theory to achieve targeted strength, enhanced durability, and minimum paste volume. The factors that primarily influence the strength and durability of concrete are the amount of SCM, cement, and water. Depending on data from past studies, a relationship between compressive strength and the water-cementitious material ratio is introduced in the proposed mixture design method to achieve targeted early age strength. The optimal percentage of SCM for use in concrete was assessed using strength efficiency method. The proposed mixture design method shows that SCC made with an optimal percentage of metakaolin as SCM at W/CM of 0.38, 0.26, and 0.17 achieved the expected strengths of 60, 90, and 120 MPa, respectively, after 28 days of standard curing. (C) 2019 Elsevier Ltd. All rights reserved.
机译:本文介绍了自压力混凝土(SCC)的混合设计方法,同时利用补充水泥材料(SCM)来设计混凝土混合物,以评估早期强度和自致密性。所提出的程序“强度为基础的混合物设计方法”还利用包装理论来实现靶向强度,增强耐久性和最低浆料体积。主要影响混凝土强度和耐久性的因素是SCM,水泥和水的量。根据过去研究的数据,在提出的混合物设计方法中引入了抗压强度与水水泥材料比之间的关系,以实现靶向休眠强度。利用强度效率法评估混凝土中使用的SCM的最佳百分比。所提出的混合物设计方法表明,在标准固化28天后,具有0.38,0.26和0.17的W / cm,0.38,0.17的SCM的最佳百分比的SCC分别实现了60,90和120MPa的预期强度。 (c)2019 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号