...
首页> 外文期刊>Computer Methods in Applied Mechanics and Engineering >Confidence structural robust design and optimization under stiffness and load uncertainties
【24h】

Confidence structural robust design and optimization under stiffness and load uncertainties

机译:刚度和载荷不确定性下的置信结构鲁棒设计和优化

获取原文
获取原文并翻译 | 示例

摘要

Most of the structural behavior constraints involved in structural robust design and optimization are non-convex in nature. Therefore if local optimality criteria based optimization algorithms are employed to find the worst case structural responses that are used for examining the feasibility of a given design, it is highly possible that the optimization process will get stuck in a local optimum. If this is the case, the reliability of a "robust" design cannot be guaranteed, at least theoretically. The aim of the present paper is to develop some new formulations and the corresponding numerical algorithms to find the confidence optimal design under non-probabilistic stiffness and load uncertainties. To this end, two Bi-level program formulations for confidence robust design are proposed. In order to ensure the strict feasibility of the optimal solution, in the lower-level of program, the constraints are imposed on the confidence upper bounds of the structural responses, which can be obtained efficiently by solving some convex linear semi-definite programs (LSDPs). Based on the sensitivity analysis of the lower-level LSDP problem, the upper level programs are then solved by employing the classical gradient-based nonlinear optimization algorithms. Furthermore, for the case of stiffness uncertainty, a single-level nonlinear semi-definite programming (NSDP) formulation is also proposed and its mathematical properties are analyzed. Numerical examples show that confidence robust optimal design can be obtained via the proposed approaches effectively without resorting to too many computational efforts.
机译:结构鲁棒性设计和优化中涉及的大多数结构行为约束本质上都是非凸的。因此,如果采用基于局部最优性标准的优化算法来查找用于检查给定设计可行性的最坏情况结构响应,则优化过程很可能陷入局部最优状态。如果是这样,至少在理论上不能保证“稳健”设计的可靠性。本文的目的是开发一些新的公式和相应的数值算法,以找到在非概率刚度和载荷不确定性下的置信度最优设计。为此,提出了两种用于可靠设计的双层方案。为了确保最优解的严格可行性,在程序的下级,对结构响应的置信上限施加了约束,可以通过求解一些凸线性半定程序(LSDP)有效地获得约束。 )。在对下层LSDP问题进行敏感性分析的基础上,采用经典的基于梯度的非线性优化算法求解上层程序。此外,对于刚度不确定的情况,还提出了单级非线性半定规划(NSDP)公式,并对其数学性质进行了分析。数值算例表明,通过所提出的方法,可以有效地获得置信鲁棒的最优设计,而无需进行过多的计算工作。

著录项

  • 来源
  • 作者单位

    State Key Laboratory of Structural Analysis for Industrial Equipment, Department of Engineering Mechanics, Dalian University of Technology, Dalian 116024, PR China;

    State Key Laboratory of Structural Analysis for Industrial Equipment, Department of Engineering Mechanics, Dalian University of Technology, Dalian 116024, PR China;

    State Key Laboratory of Structural Analysis for Industrial Equipment, Department of Engineering Mechanics, Dalian University of Technology, Dalian 116024, PR China;

    State Key Laboratory of Structural Analysis for Industrial Equipment, Department of Engineering Mechanics, Dalian University of Technology, Dalian 116024, PR China;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    robust design and optimization; parameter uncertainty; semi-definite program; global optimum;

    机译:健壮的设计和优化;参数不确定性半定程序全局最优;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号