...
首页> 外文期刊>Composites >Calcined and natural frustules filled epoxy matrices: The effect of volume fraction on the tensile and compression behavior
【24h】

Calcined and natural frustules filled epoxy matrices: The effect of volume fraction on the tensile and compression behavior

机译:煅烧的和天然的无壳橡胶填充的环氧树脂基体:体积分数对拉伸和压缩行为的影响

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

The effects of calcined diatom (CD) and natural diatom (ND) frustules filling (0-12 vol.%) on the quasi-static tensile and quasi-static and high strain rate compression behavior of an epoxy matrix were investigated experimentally. The high strain rate testing of frustules-filled and neat epoxy samples was performed in a compression Split Hopkinson Pressure Bar set-up. The frustules filling increased the stress values at a constant strain and decreased the tensile failure strains of the epoxy matrix. Compression tests results showed that frustules filling of epoxy increased both elastic modulus and yield strength values at quasi-static and high strain rates. While, a higher strengthening effect and strain rate sensitivity were found with ND frustules filling. Microscopic observations revealed two main compression deformation modes at quasi-static strain rates: the debonding of the frustules from the epoxy and/or crushing of the frustules. However, the failure of the filled composites at high strain rates was dominated by the fracture of epoxy matrix.
机译:实验研究了煅烧硅藻(CD)和天然硅藻(ND)壳填充物(0-12 vol。%)对环氧基质的准静态拉伸和准静态和高应变率压缩行为的影响。在压缩的斯普利特霍普金森压力棒装置中对填充有无壳的样品和纯净的环氧树脂样品进行高应变率测试。截头填充物在恒定应变下增加了应力值,并降低了环氧基质的拉伸破坏应变。压缩试验结果表明,在准静态和高应变速率下,环氧树脂的无壳填充物增加了弹性模量和屈服强度值。同时,ND扁壳填充物具有更高的增强效果和应变率敏感性。显微观察揭示了在准静态应变率下的两种主要压缩变形模式:壳与环氧树脂的脱粘和/或壳的压碎。然而,填充复合材料在高应变速率下的破坏主要是由环氧树脂基体的断裂引起的。

著录项

  • 来源
    《Composites》 |2013年第1期|491-500|共10页
  • 作者单位

    Dynamic Testing and Modeling Laboratory and Department of Mechanical Engineering, Izmir Institute of Technology, Gulbahce, Urla, Izmir, Turkey;

    Dynamic Testing and Modeling Laboratory and Department of Mechanical Engineering, Izmir Institute of Technology, Gulbahce, Urla, Izmir, Turkey;

    Dynamic Testing and Modeling Laboratory and Department of Mechanical Engineering, Izmir Institute of Technology, Gulbahce, Urla, Izmir, Turkey;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    A. Polymer-matrix composites (PMCs); B. Mechanical properties; B. Impact behavior; D. Mechanical testing;

    机译:A.聚合物基复合材料(PMC);机械性能;B.冲击行为;D.机械测试;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号