Use of enriched shell elements compared to solid elements for modelling delamination growth during impact on composites

摘要

Simulation of damage in composite laminates using currently available three-dimensional finite element tools is computationally demanding often to the point that analysis is not practical. This paper presents an enriched shell element that can provide a computationally efficient means to simulate low-velocity impact damage in a composite. The enriched element uses the Floating Node Method and a damage algorithm based on the Virtual Crack Closure Technique that is capable of simulating progressive damage growth consisting of delamination and delamination-migrations from ply to ply during a dynamic impact load. This paper presents results from the shell model in a test-analysis correlation for impact testing of 7-ply and 56-ply laminates. Analysis results from a separate high-fidelity three-dimensional finite element analysis are included also for comparison in the case of the 7-ply laminate, but not in the case the 56-ply laminate due to excessive computational demand. This paper serves as the first application of both models in low-velocity impact simulation. The shell model is considerably more computationally efficient than the high-fidelity model by at least an order of magnitude and is shown to produce results, while not as accurate as the high-fidelity model, potentially sufficiently accurate for a wide range of engineering applications including structural design and rapid prototype assessments.