首页> 外文期刊>Combustion Science and Technology >NUMERICAL INVESTIGATION OF DEFLAGRATION TO DETONATION TRANSITIONS
【24h】

NUMERICAL INVESTIGATION OF DEFLAGRATION TO DETONATION TRANSITIONS

机译:爆轰过渡过程的数值研究

获取原文
获取原文并翻译 | 示例
           

摘要

Transitions from deflagration to detonations are studied. A model consisting of the Navier-Stokes equation and a one-step reaction equation is used. Arrhenius kinetics are utilized, and the diffusive parameters of the problem are chosen so that the smallest scale of the problem can be resolved on the chosen grid. It is shown that for certain parameter regimes the transition can be described by three phases. First, an ordinary flame accelerates and a shock wave of increasing strength is produced ahead of and separated from the flame. In this phase, the shock wave "preconditions" the unburnt media. The pressure in the fluid between the flame and the shock wave increases with time. In the second phase, a "converted explosion" in the compressed state occurs, which is responsible for the transition to an overdriven detonation. In this phase peak pressures substantially larger than the Zeldovich Neumann Doering (ZND) pressure are obtained. Third, a relaxation to an ordinary Chapman-Jouget (CJ) detonation occurs. The convected explosion is driven by a gradient in the source term in the reaction equation. One-dimensional calculations show that the extension of the gradient required for a transition to occur is reduced if the strength of the shock wave is increased. The transition process is very sensitive to perturbations, and examples of this are shown by numerical experiments. It is also shown that the maximum separation between the shock wave and the flame zone increases with increasing activation temperature.
机译:研究了从爆燃到爆炸的过渡。使用由Navier-Stokes方程和一步反应方程组成的模型。利用阿伦尼乌斯动力学,并选择问题的扩散参数,以便可以在所选网格上解决问题的最小尺度。结果表明,对于某些参数范围,过渡可以用三个阶段来描述。首先,普通火焰加速,并且在火焰之前并与火焰分离并产生强度增加的冲击波。在此阶段,冲击波“预处理”了未燃烧的介质。火焰和冲击波之间的流体压力随时间增加。在第二阶段,在压缩状态下发生“转换爆炸”,这是过渡到过度驱动爆炸的原因。在该阶段,获得的峰值压力明显大于Zeldovich Neumann Doering(ZND)压力。第三,发生了普通的查普曼·朱格(CJ)爆炸的弛豫。对流爆炸是由反应方程中源项中的梯度驱动的。一维计算显示,如果增加冲击波的强度,则发生过渡所需的坡度范围会减小。过渡过程对扰动非常敏感,数值实验显示了这种情况的示例。还显示出,冲击波和火焰区域之间的最大间隔随着激活温度的升高而增加。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号