首页> 外文期刊>Combustion and Flame >Methane auto-ignition delay times and oxidation regimes in MILD combustion at atmospheric pressure
【24h】

Methane auto-ignition delay times and oxidation regimes in MILD combustion at atmospheric pressure

机译:大气压下轻度燃烧中甲烷的自燃延迟时间和氧化方式

获取原文
获取原文并翻译 | 示例
       

摘要

MILD/oxy-fuel combustion is proving to be a reliable technology for clean and efficient energy production systems. It is by now established that the related operative conditions drastically change the combustion kinetics and the relative weight of kinetics and fluid-dynamics involved in the process. Thus a fundamental analysis of single sub-processes involved in fuel oxidation under MILD combustion conditions is needed to make easier the tuning and control of real systems in a wider range of working conditions, thus allowing for the spread of such a technology over a broader industrial scale. Such a work is devoted to the characterization of combustion regimes and the evaluation of auto-ignition delay times of methane in highly diluted and pre-heated conditions at atmospheric pressure in a one-dimensional flow reactor. Experimental tests have been carried out changing the mixture inlet temperature from 1100 up to 1400 K, as well as the mixture carbon/oxygen feed ratios from fuel ultra-lean up to rich conditions. Mixtures are diluted in nitrogen from 85% up to 95%. At the same time, numerical simulations have been performed by means of a commercial software and a kinetic mechanism available in literature to value its reliability in predicting experimental results under MILD oxidation conditions. Results clearly show the occurrence of some discrepancies between numerical and experimental auto-ignition delay time data for fuel rich mixtures at high inlet temperatures. In addition, a richness of combustion regimes (slow combustion, pyrolysis, dynamic behavior, transitional combustion, combustion) was experimentally found. These unique behaviors as well as the dependence of ignition process on environmental parameters outline that modest temperature gradients due to high mixture dilution levels typical of MILD oxidation conditions, coupled with heat exchange to the surroundings, slow down the changeover among kinetic routes (namely oxidation and recombination channels) promoted by temperature thus stressing their competition. Such an aspect is generally hidden in traditional systems by a strong heat release that implies high temperature gradients. Finally, the data reported in this paper have an intrinsic value for the identification of stable operative conditions and for either tuning or reducing detailed kinetic schemes because few data are present in literature on methane ignition and oxidation in a simple reactor at atmospheric pressure.
机译:轻度/富氧燃烧被证明是清洁高效的能源生产系统的可靠技术。现已确定,相关的操作条件会极大地改变燃烧动力学以及过程中涉及的动力学和流体动力学的相对权重。因此,需要对在MILD燃烧条件下涉及燃料氧化的单个子过程进行基础分析,以简化在较宽的工作条件范围内对实际系统的调试和控制,从而使这种技术可以在更广泛的工业中推广使用。规模。这项工作致力于在一维流动反应器中,在大气压力下高度稀释和预热条件下,燃烧状态的表征和甲烷自燃延迟时间的评估。已经进行了实验测试,将混合物入口温度从1100升高到1400 K,以及从超稀薄燃料到浓稠条件的混合物碳/氧进料比。将混合物在氮气中从85%稀释到95%。同时,已经通过商业软件和文献中提供的动力学机制进行了数值模拟,以评估其在MILD氧化条件下预测实验结果的可靠性。结果清楚地表明,在进气温度较高的情况下,富燃料混合物的数字自动点火延迟时间数据与实验自动点火延迟时间数据之间存在某些差异。此外,通过实验发现了丰富的燃烧方式(慢速燃烧,热解,动态行为,过渡燃烧,燃烧)。这些独特的行为以及点火过程对环境参数的依赖性表明,由于MILD氧化条件中典型的高混合气稀释水平导致适度的温度梯度,再加上与周围环境的热交换,减缓了动力学路线(即氧化和氧化)之间的转换。温度促进了重组通道的形成,从而加剧了竞争。传统的系统通常通过强烈的热释放隐瞒了这一方面,这意味着高温梯度。最后,本文报道的数据对于鉴定稳定的操作条件以及调整或减少详细的动力学方案具有内在价值,因为文献中很少有关于大气压下简单反应器中甲烷燃烧和氧化的数据。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号