PROCEDURE FOR DETERMINATION OF FILTRATION FACTOR FOR HIGH-VISCOSITY POLYMERIC MATERIALS

P. A. Urseev; O. V. Tinkov; Z. P. Lukicheva

首页> 外文期刊>Chemical and Petroleum Engineering >PROCEDURE FOR DETERMINATION OF FILTRATION FACTOR FOR HIGH-VISCOSITY POLYMERIC MATERIALS

【24h】

PROCEDURE FOR DETERMINATION OF FILTRATION FACTOR FOR HIGH-VISCOSITY POLYMERIC MATERIALS

机译：高粘度聚合物材料过滤因子的测定方法

获取原文

获取原文并翻译 | 示例

获取外文期刊封面封底 >>

开具论文收录证明 >>

文献代查 >>

团队文献服务 >>

页面导航

摘要
著录项
相似文献
相关主题

摘要

A procedure is proposed for determination of the filtration factor for high-viscosity polymeric materials. It is intended for the molding of blends with granular-structured binding components by compressive impregnation. This procedure is described in detail, and recommendations are given for processing of experimental data.

机译：提出了一种用于确定高粘度聚合物材料的过滤系数的程序。它旨在通过压缩浸渍模制具有颗粒结构的粘合成分的共混物。详细介绍了此过程，并提供了处理实验数据的建议。

著录项

来源
《Chemical and Petroleum Engineering 》 |2015年第4期| 153-158| 共6页
作者
P. A. Urseev; O. V. Tinkov; Z. P. Lukicheva;
展开▼
作者单位

Moscow State University of Mechanical Engineering (MAMI), Moscow, Russia;

Moscow State University of Mechanical Engineering (MAMI), Moscow, Russia;

Krasnoarmeisk Research Institute of Mechanization, Krasnoarmeisk, Russia;

展开▼
收录信息
原文格式 PDF
正文语种 eng
中图分类
关键词
compressive impregnation; filtration factor; high-viscosity polymers; granules of binder; powdery filler;

机译：压缩浸渍过滤系数;高粘度聚合物粘合剂颗粒;粉状填料;

相似文献

外文文献
中文文献
专利

1. "On the use of the essential work of fracture procedure in the determination of the fracture energy of tough polymeric materials" [J] . Gonzalez I, Eguiazabal JI, Nazabal J Polymer Testing . 2009 ,第7期

机译：“在确定坚韧的聚合物材料的断裂能时使用断裂程序的基本工作”
2. Advances in studies of thermal degradation of polymeric materials Part II. The influence of various factors on the thermal degradation of polymeric materials during their processing [J] . Kosmalska Darla, Kaczmarek Halina, Malinowski Rafal, Polimery . 2019 ,第5期

机译：聚合物材料第II部分热降解研究进展。各种因素对其加工过程中聚合物材料热降解的影响
3. Surface tridimensional topography analysis of materials and finishing procedures after resinous infiltration of subsurface bovine enamel lesions. [J] . Mueller J, Yang F, Neumann K, Quintessence international . 2011 ,第2期

机译：树脂渗入地下牛牙釉质病灶后，对材料和表面处理程序进行表面三维形貌分析。
4. Polymer Infiltration Toughened Hydroxyapatite Biomaterial Hybrids by Bio-inspired Materials Design [C] . Rohit Khanna, Aires Jose Capitao Ngunza, Xiaodu Wang Society for Biomaterials annual meeting and exposition . 2017

机译：生物启发材料设计的聚合物渗透增韧羟基磷灰石生物材料杂化材料
5. Development of test equipment and procedures for determination of the gas-breaktrough pressure of compacted clay materials with preliminary results. [D] . Kirkham, Timothy Lawrence. 1995

机译：开发用于确定压实粘土材料的气体穿透压力的测试设备和程序，并获得了初步结果。
6. A Highly Sensitive Multicommuted Flow Analysis Procedure for Photometric Determination of Molybdenum in Plant Materials without a Solvent Extraction Step [O] . Felisberto G. Santos, Boaventura F. Reis 2017

机译：无需溶剂萃取步骤即可光度法测定植物材料中钼的高灵敏多通量流动分析程序
7. Hydrochloric acid extraction procedure for determination of inorganic components in food and its related materials. Part II. Application of hydrochloric acid extraction procedure to determination of metal elements in cereals, leaves and marine alga by atomic absorption spectrophotometry. [O] . Akemi YASUI, Hideo KOIZUMI, Chuichi TSUTSUMI 1985

机译：盐酸提取方法，用于测定食品中无机成分及其相关材料。第二部分。盐酸提取方法在原子吸收分光光度法中施用谷物，叶和海藻中金属元素的应用。
8. Very Low Surface Energy (<11 dyn cm-1) Heterophase Polymeric Materials for Membrane Separations: An Integrated Polymer Chemistry/Engineering Approach and The Influence of Backpulsing on Fouling Properties of Novel Nanofiltration Membranes for Wastewater Remediation [R] . Freeman, B. D. , DeSimone, J. M. 1998

机译：极低表面能（<11 dyn cm-1）用于膜分离的异相高分子材料：综合聚合物化学/工程方法和反吹对新型纳滤膜污垢修复性能的影响

PROCEDURE FOR DETERMINATION OF FILTRATION FACTOR FOR HIGH-VISCOSITY POLYMERIC MATERIALS

摘要

著录项

相似文献

相关主题

期刊订阅