首页> 外文期刊>CES Transactions on Electrical Machines and Systems >Research on torque ripple under healthy and open-circuit fault-tolerant conditions in a PM multiphase machine
【24h】

Research on torque ripple under healthy and open-circuit fault-tolerant conditions in a PM multiphase machine

机译:PM多相机中健康开路容错条件下的扭矩纹波研究

获取原文
获取原文并翻译 | 示例
       

摘要

In this paper, research into torque ripple production has been undertaken for both the healthy and open-circuit fault- tolerant conditions of a five-phase permanent magnet (PM) machine by using the instantaneous power (I-Power) approach. When only the fundamental component of the phase currents is applied to the phase windings, it has been shown that the 9th and 11th harmonics of the back-electromotive force (back-EMF) causes torque ripples in a five-phase PM machine and its frequency is ten times the frequency of the fundamental phase currents. When the combined fundamental and third harmonic components of the phase currents are applied to the phase windings, it has been shown that the 7th and 13th harmonic of the back-electromotive force (back-EMF) causes additional torque ripples in a five-phase PM machine .These torque ripples under fault-tolerant conditions have been analyzed analytically, as well. It has been proven that there are interactions between the fundamental component of current and the third harmonic component of the back-EMF and vice versa. These interactions cause torque ripples. A finite element analysis (FEA) model of the five-phase PM machine has been done to validate the analytical results.
机译:本文通过使用瞬时电力(I-POWER)方法,已经为五相永磁体(PM)机器的健康和开路容错条件进行了转矩脉动生产的研究。当仅将相电流的基本分量施加到相绕组时,已经示出了后电动势(后EMF)的第9和第11次谐波导致五相PM机器及其频率中的扭矩涟漪是基本相电流的频率的十倍。当相电流的组合的基本和三次谐波分量施加到相位绕组时,已经表明,背部电动势(后EMF)的第7和第13次谐波导致五相PM中的额外扭矩涟漪机器。在容错条件下的这些扭矩涟漪已经分析地分析。已经证明,当前的基本组分和后欧的三次谐波分量之间存在相互作用,反之亦然。这些相互作用会导致扭矩涟漪。已经进行了五阶段PM机的有限元分析(FEA)模型以验证分析结果。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号