首页> 外文期刊>Bulletin of engineering geology and the environment >Behavior of compacted expansive soil under multi-directional stress and deformation boundary conditions
【24h】

Behavior of compacted expansive soil under multi-directional stress and deformation boundary conditions

机译:压实膨胀土在多向应力和变形边界条件下的行为

获取原文
获取原文并翻译 | 示例
           

摘要

This study aims at investigating the effect of multi-direction stress and deformation boundary conditions on the volume change behavior of highly expansive compacted soils. Stress boundary condition refers to the stresses applied on the axial and lateral boundaries of the specimen. Deformation boundary condition refers to restraint imposed on the axial or lateral boundaries of the specimen. To this end, a series of response-to-wetting triaxial tests were carried out to simulate three boundary conditions; namely, constant isotropic stress (CIP), constant axial (CA) deformation, and constant volume (CV). In addition, a series of one-dimensional consolidation tests (oedometer tests) was performed to provide baseline information on volume change of expansive specimens under fully laterally restrained conditions. All tests, including the triaxial, axial stress and oedometer tests, were performed under a wide range of confining pressures, ranging between 50 and 800 kPa. Test results revealed that stress conditions had a significant effect on the magnitude and sign of strain realized during inundation of CIP and CA specimens. It was observed that axial restraint (in CA tests) or full restraint (in CV tests) induced time-dependent changes in stresses. In addition, this study demonstrated the effect of stress ratio, K, on the axial and volumetric swelling behavior of tested specimens. Finally, comparisons between triaxial and oedometer test results were conducted for realistic estimation of swelling strain under given boundary and stress conditions.
机译:这项研究旨在研究多向应力和变形边界条件对高膨胀压实土体体积变化行为的影响。应力边界条件是指施加在试样轴向和横向边界上的应力。变形边界条件是指对试样的轴向或横向边界施加的约束。为此,进行了一系列的润湿响应三轴试验来模拟三个边界条件。即恒定的各向同性应力(CIP),恒定的轴向(CA)变形和恒定的体积(CV)。此外,还进行了一系列一维固结测试(里程表测试),以提供有关在完全横向约束条件下膨胀试样体积变化的基线信息。所有测试,包括三轴,轴向应力和里程表测试,都是在50到800 kPa范围内的很大围压下进行的。测试结果表明,应力条件对在CIP和CA标本浸没期间实现的应变的大小和信号有显着影响。据观察,轴向约束(在CA测试中)或完全约束(在CV测试中)会导致应力随时间的变化。此外,这项研究证明了应力比K对被测样品的轴向和体积膨胀行为的影响。最后,在给定的边界和应力条件下,对三轴测试仪和里程表的测试结果进行了比较,以实际估算膨胀应变。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号