...
首页> 外文期刊>The Astrophysical journal >COLLIMATION, PROPER MOTIONS, AND PHYSICAL CONDITIONS IN THE HH 30 JET FROM HUBBLE SPACE TELESCOPE SLITLESS SPECTROSCOPY
【24h】

COLLIMATION, PROPER MOTIONS, AND PHYSICAL CONDITIONS IN THE HH 30 JET FROM HUBBLE SPACE TELESCOPE SLITLESS SPECTROSCOPY

机译:HB 30喷气式望远镜空间望远镜的收集,适当运动和身体状况

获取原文
获取原文并翻译 | 示例
           

摘要

We present STIS spectral images of the HH 30 stellar jet taken through a wide slit over two epochs. The jet is unresolved spectrally, so the observations produce emission-line images for each line in the spectrum. This rich data set shows how physical conditions in the jet vary with distance and time, produces precise proper motions of knots within the jet, resolves the jet width close to the star, and gives a spectrum of the reflected light from the disk over a large wavelength range at several positions. We introduce a new method for analyzing a set of line ratios based on minimizing a quadratic form between models and data. The method generates images of the density, temperature, and ionization fraction computed using all the possible line ratios appropriately weighted. In HH 30, the density declines with distance from the source in a manner consistent with an expanding flow and is larger by a factor of 2 along the axis of the jet than it is at the periphery. Ionization in the jet ranges from ~5% to 40%, and high-ionization/excitation knots form at about 100 AU from the star and propagate outward with the flow. These high-excitation knots are not accompanied by corresponding increases in the density, so if formed by velocity variations the knots must have a strong internal magnetic pressure to smooth out density increases while lengthening recombination times.
机译:我们展示了HH 30恒星喷射的STIS光谱图像,它是通过两个时代的宽缝拍摄的。射流在光谱上是无法分辨的,因此观察会产生光谱中每条线的发射线图像。这个丰富的数据集显示了射流中的物理条件如何随距离和时间变化,如何在射流中产生精确的结节正确运动,分辨射流的宽度接近恒星,以及在大范围内给出了来自磁盘的反射光光谱在几个位置的波长范围。我们基于最小化模型和数据之间的二次形式,介绍了一种用于分析线比例集的新方法。该方法生成使用适当加权的所有可能的线比率计算出的密度,温度和电离分数的图像。在HH 30中,密度随着与源的距离的增加而减小,并与扩展的流一致,并且沿着射流的轴的密度比在外围的密度大2倍。射流中的电离范围为〜5%至40%,高电离/激发结在距恒星约100 AU处形成并随气流向外传播。这些高激励结不会伴随密度的相应增加,因此,如果通过速度变化形成结,则结必须具有强大的内部磁压以消除密度增加的问题,同时延长重组时间。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号