...
首页> 外文期刊>Applied Physics Letters >Impact of process temperature on GaSb metal-oxide-semiconductor interface properties fabricated by ex-situ process
【24h】

Impact of process temperature on GaSb metal-oxide-semiconductor interface properties fabricated by ex-situ process

机译:工艺温度对异位制备GaSb金属氧化物半导体界面性能的影响

获取原文
获取原文并翻译 | 示例

摘要

We have studied the impact of process temperature on interface properties of GaSb metal-oxide-semiconductor (MOS) structures fabricated by an ex-situ atomic-layer-deposition (ALD) process. We have found that the ALD temperature strongly affects the Al2O3/GaSb MOS interface properties. The Al2O3/GaSb MOS interfaces fabricated at the low ALD temperature of 150 °C have the minimum interface-trap density (Dit) of ∼4.5 × 1013 cm−2 eV−1. We have also found that the post-metalization annealing at temperature higher than 200 °C degrades the Al2O3/GaSb MOS interface properties. The low-temperature process is preferable in fabricating GaSb MOS interfaces in the ex-situ ALD process to avoid the high-temperature-induced degradations.
机译:我们已经研究了工艺温度对通过异位原子层沉积(ALD)工艺制造的GaSb金属氧化物半导体(MOS)结构的界面性能的影响。我们已经发现,ALD温度会严重影响Al2O3 / GaSb MOS界面的性能。在ALD温度为150°C的情况下制造的Al2O3 / GaSb MOS界面的最小界面陷阱密度(Dit)约为4.5×10 13 cm -2 eV -1 。我们还发现,在高于200°C的温度下进行后金属化退火会降低Al2O3 / GaSb MOS界面的性能。低温工艺在非原位ALD工艺中制造GaSb MOS界面中是优选的,以避免高温引起的劣化。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号