首页> 外文期刊>Applied Mechanics and Materials >The Study of Synthesis Parameters of Synthesis Ni-Rich of LiNi_(0.75)Mn_(0.15)Co_(0.10)O_2 Powder by Co-Precipitation Method
【24h】

The Study of Synthesis Parameters of Synthesis Ni-Rich of LiNi_(0.75)Mn_(0.15)Co_(0.10)O_2 Powder by Co-Precipitation Method

机译:共沉淀法研究LiNi_(0.75)Mn_(0.15)Co_(0.10)O_2粉末的富Ni合成参数

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

Lithium Nickel Manganese Cobalt Oxide (LiNi_(0.75)Mn_(0.15)Co_(0.10)O_(2): NMC) is become interested materials for lithium battery applications due to high specific energy and low cost. The pure phase and well-ordered layered structure has been synthesized by co-precipitation method. In this study, the Nickel-rich LiNi_(0.75)Mn_(0.15)Co_(0.10)O_(2 )positive electrode powder was prepared using co-precipitation method. The influence of synthesis parameters such as calcination temperature, time and amount of water for rinse a NaOH and NH_(4)OH were studied. Then, phase formation and structure were studied by X-ray Powder Diffraction (XRD). The morphological changes is also confirmed by scanning electron microscope (SEM). A checking weight loss by thermo gravimetric Analysis (TGA). Finally, the optimum parameter to prepare highest pure NMC powder are rinse suddenly until pH 7 and calcination only single1 step.
机译:锂镍锰钴氧化物(LiNi_(0.75)Mn_(0.15)Co_(0.10)O_(2):NMC)由于高的比能和低成本而成为锂电池应用中感兴趣的材料。通过共沉淀法合成了纯相和有序的层状结构。本研究采用共沉淀法制备了富镍的LiNi_(0.75)Mn_(0.15)Co_(0.10)O_(2)正极粉。研究了合成参数的影响,例如煅烧温度,时间和用于冲洗NaOH和NH_(4)OH的水量。然后,通过X射线粉末衍射(XRD)研究了相的形成和结构。形态变化也通过扫描电子显微镜(SEM)确认。通过热重分析(TGA)检查重量损失。最后,将制备最高纯度NMC粉末的最佳参数突然冲洗至pH 7,然后仅一步煅烧即可。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号