首页> 外文期刊>Applied Acoustics >Experimental investigation of the aquatic propulsion caused by localised flexural wave propagation in immersed wedges and plates
【24h】

Experimental investigation of the aquatic propulsion caused by localised flexural wave propagation in immersed wedges and plates

机译:浸入式楔形板中局部弯曲波传播对水动力的实验研究

获取原文
获取原文并翻译 | 示例
       

摘要

This paper describes the results of the experimental verification of the idea of wave-like aquatic propulsion of autonomous and man-inhabited vessels first published about 10 years ago by one of the present authors (V.V.K.). The idea is based on employing the unique type of localised flexural elastic waves propagating along edges of wedge-like structures immersed in water (wedge elastic waves). Such wedge-like structures supporting localised elastic waves can be attached like fish fins to a body of a small ship or a submarine and used for their propulsion. The proposed principle of employing localised flexural waves as a source of aquatic propulsion has been biologically inspired by the specific swimming mode used in nature by stingrays. To verify the idea experimentally, the first working prototype of a small catamaran using the above-mentioned wave-like propulsion via the attached rubber keel has been build and tested in Loughborough University. The tests have been carried out in two phases, in a water tank and then in open water. The test results have shown that the catamaran was propelled very efficiently and could achieve the speed of 36 cm/s, i.e., about one vehicle length per second, thus demonstrating that the idea of wave-like propulsion of small man-inhabited craft is viable. The reported proof of the viability of this idea may open new opportunities for marine craft propulsion, which can have far reaching implications.
机译:本文描述了由一位作者(V.V.K.)于大约10年前首次发表的关于对自主和有人居住的船的波浪状水推进概念进行实验验证的结果。这个想法是基于采用独特类型的局部弯曲弹性波(沿着楔形结构浸入水中的边缘)传播的(楔形弹性波)。这样的支撑局部弹性波的楔形结构可以像鱼鳍一样附接到小船或潜水艇的主体上,并用于推进它们。利用局部弯曲波作为水质推进源的拟议原理在生物学上受到了黄貂鱼在自然界中使用的特定游泳方式的启发。为了通过实验验证这一想法,已经在拉夫堡大学建造并测试了使用上述双波状推进力的小型双体船通过附着的橡胶龙骨制造的第一个工作原型。测试分两个阶段进行,分别在水箱和开阔水域中。测试结果表明,双体船被非常有效地推进,并且可以达到36 cm / s的速度,即每秒大约一车的长度,因此证明了小型人船的波浪状推进的想法是可行的。所报告的这种想法的可行性证明可能为船舶推进提供新的机会,这可能会产生深远的影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号