首页> 外文期刊>Antennas and Propagation, IEEE Transactions on >Dual-Function Radiating Glass for Antennas and Light Covers—Part I: Omnidirectional Glass Dielectric Resonator Antennas
【24h】

Dual-Function Radiating Glass for Antennas and Light Covers—Part I: Omnidirectional Glass Dielectric Resonator Antennas

机译:天线和灯罩的双重功能辐射玻璃—第一部分:全向玻璃介电共振器天线

获取原文
获取原文并翻译 | 示例
       

摘要

The dual-function glass dielectric resonator antenna (DRA) that simultaneously serves as a light cover is investigated for the first time. This paper is the first part, which demonstrates the idea using omnidirectional hollow rectangular glass DRAs. Both linearly polarized (LP) and circularly polarized (CP) designs are given. The glass DRA can generate CP fields by adding metallic patches onto its side walls, with a 3-dB axial ratio bandwidth of $sim 7%$. To obtain an entirely light-transmissible CP glass DRA, conducting indium tin oxide (ITO) patches are used in place of the metallic patches. For each of the LP and CP designs, powered light emitting diodes (LEDs) are placed inside the hollow region of the glass DRA to serve as the light source. It is shown that practically the lighting and antenna parts do not interfere with each other. The reflection coefficient, axial ratio (CP designs only), radiation patterns, and antenna gains of the proposed LP and CP antennas are studied, and good agreement between measured and simulated results is observed.
机译:首次研究了同时用作光罩的双功能玻璃介电共振器天线(DRA)。本文是第一部分,论证了使用全向中空矩形玻璃DRA的想法。给出了线性极化(LP)和圆极化(CP)设计。玻璃DRA可以通过在侧壁上添加金属补丁来产生CP场,其轴向比率带宽为3 dB, $ sim 7%$ 。为了获得完全透光的CP玻璃DRA,可使用导电铟锡氧化物(ITO)贴片代替金属贴片。对于LP和CP设计中的每一个,都将有源发光二极管(LED)放在玻璃DRA的中空区域内以用作光源。结果表明,照明和天线部分实际上并不相互干扰。研究了所提出的LP和CP天线的反射系数,轴比(仅CP设计),辐射方向图和天线增益,并观察到了测量结果与仿真结果的良好一致性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号