首页> 外文期刊>IEEE Transactions on Antennas and Propagation >A Port and Frequency Reconfigurable MIMO Slot Antenna for WLAN Applications
【24h】

A Port and Frequency Reconfigurable MIMO Slot Antenna for WLAN Applications

机译:用于WLAN应用的端口和频率可重新配置的MIMO缝隙天线

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

A novel compact four-port reconfigurable multiple-input multiple-output (MIMO) antenna design for IEEE 802.11 applications is proposed. In one configuration, the antenna provides four ports operating from 4.9 to 5.725 GHz with isolation between antennas greater than 14 dB. In the second configuration, it provides a two-port antenna operating at 2.4–2.5 GHz together with another two-port antenna operating at 4.9–5.725 GHz all with isolations greater than 18 dB. The structure consists of four-slot antennas, and two of the slots are made reconfigurable by including MEMS switches in the slots. The overall antenna size is compact and occupies and is printed on FR-4 printed-circuit-board. The proposed antenna is investigated by simulation and measurement, and results include radiation patterns, S-parameters, and signal correlations and branch power ratio (BPR) between ports. These show that in typical wireless environments’ envelope, cross correlations of less than 0.2 between the ports are obtained. The effect of the RF MEMS switches the antenna performance is also addressed.
机译:提出了一种新颖的紧凑型四端口可重构多输入多输出(MIMO)天线设计,用于IEEE 802.11应用。在一种配置中,该天线提供了四个端口,工作频率范围为4.9至5.725 GHz,天线之间的隔离度大于14 dB。在第二种配置中,它提供了一个工作在2.4-2.5 GHz的双端口天线以及另一个工作在4.9-5.725 GHz的两端口天线,所有天线的隔离度都大于18 dB。该结构由四个插槽的天线组成,其中两个插槽通过在插槽中包含MEMS开关而可重新配置。天线的整体尺寸紧凑且占用空间,并印刷在FR-4印刷电路板上。拟议的天线通过仿真和测量进行了研究,结果包括辐射方向图,S参数以及端口之间的信号相关性和分支功率比(BPR)。这些表明,在典型的无线环境的包络中,端口之间的互相关小于0.2。还解决了RF MEMS切换天线性能的影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号