Spatial and model-order based reactor signal analysis methodology for BWR core stability evaluation

摘要

A new methodology for the boiling water reactor core stability evaluation from measured noise signals has been recently developed and adopted at the Paul Scherrer Institut (PSI). This methodology consists in a general reactor noise analysis where as much as possible information recorded during the tests is investigated prior to determining core representative stability parameters, i.e. the decay ratio (DR) and the resonance frequency, along with an associated estimate of the uncertainty range. A central part in this approach is that the evaluation of the core stability parameters is performed not only for a few but for ALL recorded neutron flux signals, allowing thereby the assessment of signal-related uncertainties. In addition, for each signal, three different model-order optimization methods are systematically employed to take into account the sensitivity upon the model-order. The current methodology is then applied to the evaluation of the core stability measurements performed at the Leibstadt NPP, Switzerland, during cycles 10, 13 and 19. The results show that as the core becomes very stable, the method-related uncertainty becomes the major contributor to the overall uncertainty range while for intermediate DR values, the signal-related uncertainty becomes dominant. However, as the core stability deteriorates, the method-related and signal-related spreads have similar contributions to the overall uncertainty, and both are found to be small. The PSI methodology identifies the origin of the different contributions to the uncertainty. Furthermore, in order to assess the results obtained with the current methodology, a comparative study is for completeness carried out with respect to results from previously developed and applied procedures. The results show a good agreement between the current method and the other methods.