首页> 外文期刊>Advances in space research >Functional/thermal verification and validation of an S-band radio for the nanosatellites
【24h】

Functional/thermal verification and validation of an S-band radio for the nanosatellites

机译:纳米卫星S波段无线电的功能/热验证和确认

获取原文
获取原文并翻译 | 示例
           

摘要

An S-band radio designed with commercial-grade components for the nanosatellites is functionally and thermally characterized for quiet transmission. The QPSK modulation impairments are minor over −20 °C to +50 °C at 24, 26, 28 and 30 dBm RF levels. The channel response is linear in error vector magnitude, frequency, phase, amplitude and IQ errors. On the average, the stability of amplifier bias and nonlinearity gives −22 dBc maximum upper/lower adjacent channel power and 1.27 MHz occupied channel bandwidth. The acceptable level test results provide good confidence toward robust space-to-earth transmission in variable solar weather at low earth orbital altitudes.
机译:为纳米卫星设计了具有商业级组件的S波段无线电,其功能和热特性足以实现安静传输。在24、26、28和30µdBm的RF电平下,-20°C至+ 50°C范围内的QPSK调制损伤很小。通道响应在误差矢量幅度,频率,相位,幅度和IQ误差方面呈线性关系。平均而言,放大器偏置和非线性的稳定性可提供-22 / dBc的最大上下相邻信道功率和1.27 MHz的占用信道带宽。可接受的水平测试结果为在低地球轨道高度变化的太阳天气下可靠的空对地传输提供了良好的信心。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号