首页> 美国卫生研究院文献>Journal of Anatomy and Physiology >The bony horncore of the common eland (Taurotragus oryx): composition and mechanical properties of a spiral fighting structure
【2h】

The bony horncore of the common eland (Taurotragus oryx): composition and mechanical properties of a spiral fighting structure

机译:普通大羚羊(牛头羚)的骨角核心:螺旋战斗结构的组成和力学性能

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Horns are permanent structures projecting from the head of bovids, consisting of a bony horncore covered with a layer of skin and then a sheath of keratinous material showing variability of growth intensity based on nutrition. From the point of view of the horn's mechanical properties, the keratin sheath has been widely studied, but only a few studies have considered the complete structure of the horn and fewer studies have focused on the bony horncore and its characteristics. The latter showed the important role of the bony core, when cranial appendages are subject to mechanical stress (as happens during fighting). The mechanical properties of bone material, along with its mineral profile, are also important, because they can show effects of different factors, such as nutrition and mineral deficiencies in diet. For this reason, eight horncores of captive common eland male were sampled at four positions along the vertical axis of the horn. The main aim was to study variation in mechanical properties and the mineral content along the vertical axis of the horncores. We further analysed whether the spiral bony ridge present on eland horncores differs in any of the studied properties from adjacent parts of the horncore. In other antelopes, spiral ridges on the horns have been proposed to increase grip during wrestling between males. Cross‐sections of the horncores were performed at four positions along the longitudinal axis and, for each position, two bone bars were extracted to be tested in impact and bending. Moreover, in the first sampling position (the closest position to the base) two bars were extracted from the spiralled bony area. The resulting fragments were used to measure ash content, bone density and mineral content. Results showed that horn bone decreased along the vertical axis, in ash (−36%), density (−32%), and in impact work ‘ ’ (marginally significant but large effect: −48%). The concentration of several minerals decreased significantly (Mg, Cr, Mn and Tl by −33%, −25%, −31%, −43%, respectively) between the basal and the uppermost sampling site. The bone tissue of the horncore spiral compared with non‐spiral bone of the same position showed a lower ash content (53% vs. 57%), Mg and Mn; in addition to showing approximately half values in work to peak force ‘ ’, bending strength ‘ and ‘ ’, but not in Young's modulus of elasticity ‘ ’. In conclusion, similarly to the results in a totally different fighting bony structure, the antlers, the horncore of eland shows advantageous parameters in bone tissue of the base in respect to the tip, with higher values for mechanical properties, density and mineral profile. Moreover, the spiral bone tissue showed lower material mechanical properties. Probably the spiral tissue of the horn may have a role in deflecting potential cross‐sectional fractures during wrestling. In addition, it may serve to improve the grip during wrestling, and we propose that it may also prevent risk of rotation of sheath with respect to internal bone not only in this, but also in other straight bovid horns.
机译:牛角是从牛肝的头部伸出的永久性结构,包括覆盖着一层皮肤的骨质角质,然后是一层角质材料的鞘,显示出基于营养的生长强度的可变性。从牛角的机械性能的角度出发,已经对角蛋白鞘进行了广泛的研究,但是只有很少的研究考虑了牛角的完整结构,而针对牛角铁芯及其特性的研究则很少。当颅骨附件承受机械应力时(如在战斗中发生的情况),后者显示了骨核的重要作用。骨材料的机械特性及其矿物质特征也很重要,因为它们可以显示出各种因素的影响,例如饮食中的营养和矿物质缺乏。因此,在沿角的垂直轴的四个位置采样了八个圈养的普通大羚羊角铁。主要目的是研究沿角核垂直轴的机械性能和矿物质含量的变化。我们进一步分析了大羚羊角核上存在的螺旋骨脊在所研究的特性中是否与角核的相邻部分不同。在其他羚羊中,已提出在角上形成螺旋状脊以增加雄性之间摔跤时的抓地力。在沿着纵轴的四个位置执行角铁的横截面,并针对每个位置提取两个骨筋以进行冲击和弯曲测试。此外,在第一个采样位置(最靠近底部的位置),从螺旋状骨区域中提取了两个条。所得碎片用于测量灰分,骨密度和矿物质含量。结果表明,角骨沿纵轴,灰分(-36%),密度(-32%)和冲击功“”(略有影响但很大:−48%)沿垂直轴减小。在基础采样点和最高采样点之间,几种矿物质的浓度显着降低(Mg,Cr,Mn和Tl分别降低了-33%,-25%,-31%,-43%)。与相同位置的非螺旋骨相比,角核螺旋的骨组织显示出较低的灰分含量(53%比57%),Mg和Mn。除了在工作中显示峰值力“”,弯曲强度“和”的大约一半,而在杨氏弹性模量“”中不显示。总之,类似于完全不同的战斗骨骼结构,鹿角,大羚羊角核的结果,相对于尖端,它在基部的骨组织中显示出有利的参数,并具有较高的机械性能,密度和矿物质分布。而且,螺旋骨组织显示出较低的材料机械性能。角的螺旋组织可能在摔跤过程中可能偏转横截面骨折中起作用。此外,它可能有助于改善摔跤过程中的抓地力,我们建议它不仅可以防止鞘管相对于内部骨骼旋转,而且还可以防止其他牛角直角的旋转。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号