首页> 美国卫生研究院文献>Materials Today Bio >Honeycomb blocks composed of carbonate apatite β-tricalcium phosphate and hydroxyapatite for bone regeneration: effects of composition on biological responses
【2h】

Honeycomb blocks composed of carbonate apatite β-tricalcium phosphate and hydroxyapatite for bone regeneration: effects of composition on biological responses

机译:由碳磷灰石β-磷酸三钙和羟基磷灰石组成的蜂窝状骨块用于骨骼再生:成分对生物反应的影响

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Synthetic scaffolds exhibiting bone repair ability equal to that of autogenous bone are required in the fields of orthopedics and dentistry. A suitable synthetic bone graft substitute should induce osteogenic differentiation of mesenchymal stem cells, osteogenesis, and angiogenesis. In this study, three types of honeycomb blocks (HCBs), composed of hydroxyapatite (HAp), β-tricalcium phosphate (TCP), and carbonate apatite (CO Ap), were fabricated, and the effects of HCB composition on bone formation and maturation were investigated. The HC structure was selected to promote cell penetration and tissue ingrowth. HAp and β-TCP HCBs were fabricated by extrusion molding followed by sintering. The CO Ap HCBs were fabricated by extrusion molding followed by sintering and dissolution-precipitation reactions. These HCBs had similar macroporous structures: all harbored uniformly distributed macropores (∼160 ​μm) that were regularly arrayed and penetrated the blocks unidirectionally. Moreover, the volumes of macropores were nearly equal (∼0.15 ​cm /g). The compressive strengths of CO Ap, HAp, and β-TCP HCBs were 22.8 ​± ​3.5, 34.2 ​± ​3.3, and 24.4 ​± ​2.4 ​MPa, respectively. Owing to the honeycomb-type macroporous structure, the compressive strengths of these HCBs were higher than those of commercial scaffolds with intricate three-dimensional or unidirectional macroporous structure. Notably, bone maturation was markedly faster in CO Ap HCB grafting than in β-TCP and HAp HCB grafting, and the mature bone area percentages for CO Ap HCBs at postsurgery weeks 4 and 12 were 14.3- and 4.3-fold higher and 7.5- and 1.4-fold higher than those for HAp and β-TCP HCBs, respectively. The differences in bone maturation and formation were probably caused by the disparity in concentrations of calcium ions surrounding the HCBs, which were dictated by the inherent material resorption behavior and mechanism; generally, CO Ap is resorbed only by osteoclastic resorption, HAp is not resorbed, and β-TCP is rapidly dissolved even in the absence of osteoclasts. Besides the composition, the microporous structure of HC struts, inevitably generated during the formation of HCBs of various compositions, may contribute to the differences in bone maturation and formation.
机译:在骨科和牙科领域需要具有与自体骨相同的骨修复能力的合成支架。合适的合成骨移植替代物应诱导间充质干细胞的成骨分化,成骨和血管生成。在这项研究中,制造了三种类型的蜂窝块(HCB),分别由羟基磷灰石(HAp),β-磷酸三钙(TCP)和碳酸盐磷灰石(CO Ap)组成,并且HCB组成对骨形成和成熟的影响被调查了。选择HC结构以促进细胞渗透和组织向内生长。 HAp和β-TCPHCB通过挤压成型然后烧结制成。 CO Ap HCB通过挤出成型,烧结和溶解沉淀反应制备。这些六氯代苯具有类似的大孔结构:全部带有均匀分布的大孔(约160μm),这些孔规则排列并单向穿透块。此外,大孔的体积几乎相等(〜0.15 cm / g)。 CO Ap,HAp和β-TCPHCB的抗压强度分别为22.8±3.5、34.2±3.3和24.4±2.4 MPa。由于呈蜂窝状的大孔结构,这些六氯代苯的抗压强度高于具有复杂的三维或单向大孔结构的商业支架。值得注意的是,CO Ap HCB嫁接的骨成熟明显快于β-TCP和HAp HCB嫁接,并且术后4周和12周CO Ap HCB的成熟骨面积百分比分别高14.3和4.3倍,7.5和1.5倍。分别比HAp和β-TCPHCB高1.4倍。骨成熟和形成的差异可能是由于六氯代苯周围钙离子浓度的差异引起的,这是由内在的物质吸收行为和机理决定的。通常,即使没有破骨细胞,CO Ap也仅通过破骨细胞吸收而被吸收,HAp不被吸收,并且β-TCP被迅速地溶解。除了组成之外,在各种组成的HCB形成过程中不可避免地会产生HC撑杆的微孔结构,这可能会导致骨骼成熟和形成方面的差异。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号