首页> 美国卫生研究院文献>Nanoscale Research Letters >Photoluminescence of spray pyrolysis deposited ZnO nanorods
【2h】

Photoluminescence of spray pyrolysis deposited ZnO nanorods

机译:喷雾热解沉积ZnO纳米棒的光致发光

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Photoluminescence of highly structured ZnO layers comprising well-shaped hexagonal rods is presented. The ZnO rods (length 500-1,000 nm, diameter 100-300 nm) were grown in air onto a preheated soda-lime glass (SGL) or ITO/SGL substrate by low-cost chemical spray pyrolysis method using zinc chloride precursor solutions and growth temperatures in the range of 450-550°C. We report the effect of the variation in deposition parameters (substrate type, growth temperature, spray rate, solvent type) on the photoluminescence properties of the spray-deposited ZnO nanorods. A dominant near band edge (NBE) emission is observed at 300 K and at 10 K. High-resolution photoluminescence measurements at 10 K reveal fine structure of the NBE band with the dominant peaks related to the bound exciton transitions. It is found that all studied technological parameters affect the excitonic photoluminescence in ZnO nanorods.PACS: 78.55.Et, 81.15.Rs, 61.46.Km
机译:提出了高度结构化的ZnO层的光致发光,该层包含形状良好的六边形棒。 ZnO棒(长500-1,000 nm,直径100-300 nm)在空气中通过低成本化学喷雾热解法(使用氯化锌前体溶液)生长到预热的钠钙玻璃(SGL)或ITO / SGL基板上,并生长温度范围为450-550°C。我们报告了沉积参数(基板类型,生长温度,喷涂速率,溶剂类型)变化对喷涂ZnO纳米棒的光致发光性能的影响。在300 K和10 K处观察到主要的近能带边缘(NBE)发射。在10 K下的高分辨率光致发光测量揭示了NBE能带的精细结构,其主要峰与结合的激子跃迁有关。发现所有研究的技术参数都会影响ZnO纳米棒中的激子光致发光.PACS:78.55.Et,81.15.Rs,61.46.Km

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号