首页> 美国卫生研究院文献>Scientific Reports >Printed Large-Area Single-Mode Photonic Crystal Bandedge Surface-Emitting Lasers on Silicon
【2h】

Printed Large-Area Single-Mode Photonic Crystal Bandedge Surface-Emitting Lasers on Silicon

机译:硅上印刷的大面积单模光子晶体带边表面发射激光器

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

We report here an optically pumped hybrid III-V/Si photoic crystal surface emitting laser (PCSEL), consisting of a heterogeneously integrated III-V InGaAsP quantum well heterostructure gain medium, printed on a patterned defect-free Si photonic crystal (PC) bandedge cavity. Single mode lasing was achieved for a large area laser, with a side-mode suppression ratio of 28 dB, for lasing operation temperature ~200 K. Two types of lasers were demonstrated operating at different temperatures. Detailed modal analysis reveals the lasing mode matches with the estimated lasing gain threshold conditions. Our demonstration promises a hybrid laser sources on Si towards three-dimensional (3D) integrated Si photonics for on-chip wavelength-division multiplex (3D WDM) systems for a wide range of volume photonic/electronic applications in computing, communication, sensing, imaging, etc.
机译:我们在这里报告一个光泵浦的混合III-V / Si光子晶体表面发射激光器(PCSEL),该激光器由异质集成的III-V InGaAsP量子阱异质结构增益介质组成,印刷在有图案的无缺陷Si光子晶体(PC)带上腔。对于大面积激光器,在约200 K的激光工作温度下,其侧模抑制比为28 dB,实现了单模激光发射,并展示了两种类型的激光器在不同温度下工作。详细的模态分析表明,激射模式与估计的激射增益阈值条件匹配。我们的演示承诺在Si上使用混合激光源,将其集成到片上波分复用(3D WDM)系统的三维(3D)集成Si光子学中,适用于计算,通信,传感,成像等各种体积的光子/电子应用等

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号