首页> 美国卫生研究院文献>Scientific Reports >Direct measurement of optical trapping force gradient on polystyrene microspheres using a carbon nanotube mechanical resonator
【2h】

Direct measurement of optical trapping force gradient on polystyrene microspheres using a carbon nanotube mechanical resonator

机译:使用碳纳米管机械共振器直接测量聚苯乙烯微球上的光捕获力梯度

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Optical tweezers based on optical radiation pressure are widely used to manipulate nanoscale to microscale particles. This study demonstrates direct measurement of the optical force gradient distribution acting on a polystyrene (PS) microsphere using a carbon nanotube (CNT) mechanical resonator, where a PS microsphere with 3 μm diameter is welded at the CNT tip using laser heating. With the CNT mechanical resonator with PS microsphere, we measured the distribution of optical force gradient with resolution near the thermal noise limit of 0.02 pN/μm in vacuum, in which condition enables us to high accuracy measurement using the CNT mechanical resonator because of reduced mechanical damping from surrounding fluid. The obtained force gradient and the force gradient distribution agree well with theoretical values calculated using Lorenz–Mie theory.
机译:基于光辐射压力的光镊被广泛用于处理纳米级到微米级的颗粒。这项研究表明使用碳纳米管(CNT)机械谐振器直接测量作用于聚苯乙烯(PS)微球上的光学力梯度分布,其中使用激光加热将直径为3μm的PS微球焊接在CNT尖端上。使用带有PS微球的CNT机械谐振器,我们在真空中以接近0.02 pN /μm的热噪声极限的分辨率测量了光力梯度的分布,在这种情况下,由于减少了机械应力,我们可以使用CNT机械谐振器进行高精度测量周围流体的阻尼。所获得的力梯度和力梯度分布与使用Lorenz-Mie理论计算的理论值非常吻合。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号