首页> 美国卫生研究院文献>Medical Physics >Per-beam planar IMRT QA passing rates do not predict clinically relevant patient dose errors
【2h】

Per-beam planar IMRT QA passing rates do not predict clinically relevant patient dose errors

机译:每束平面IMRT QA通过率不能预测临床相关的患者剂量误差

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

>Purpose: The purpose of this work is to determine the statistical correlation between per-beam, planar IMRT QA passing rates and several clinically relevant, anatomy-based dose errors for per-patient IMRT QA. The intent is to assess the predictive power of a common conventional IMRT QA performance metric, the Gamma passing rate per beam.>Methods: Ninety-six unique data sets were created by inducing four types of dose errors in 24 clinical head and neck IMRT plans, each planned with 6 MV Varian 120-leaf MLC linear accelerators using a commercial treatment planning system and step-and-shoot delivery. The error-free beams∕plans were used as “simulated measurements” (for generating the IMRT QA dose planes and the anatomy dose metrics) to compare to the corresponding data calculated by the error-induced plans. The degree of the induced errors was tuned to mimic IMRT QA passing rates that are commonly achieved using conventional methods.>Results: Analysis of clinical metrics (parotid mean doses, spinal cord max and D1cc, CTV D95, and larynx mean) vs IMRT QA Gamma analysis (3%∕3 mm, 2∕2, 1∕1) showed that in all cases, there were only weak to moderate correlations (range of Pearson’s r-values: −0.295 to 0.653). Moreover, the moderate correlations actually had positive Pearson’s r-values (i.e., clinically relevant metric differences increased with increasing IMRT QA passing rate), indicating that some of the largest anatomy-based dose differences occurred in the cases of high IMRT QA passing rates, which may be called “false negatives.” The results also show numerous instances of false positives or cases where low IMRT QA passing rates do not imply large errors in anatomy dose metrics. In none of the cases was there correlation consistent with high predictive power of planar IMRT passing rates, i.e., in none of the cases did high IMRT QA Gamma passing rates predict low errors in anatomy dose metrics or vice versa.>Conclusions: There is a lack of correlation between conventional IMRT QA performance metrics (Gamma passing rates) and dose errors in anatomic regions-of-interest. The most common acceptance criteria and published actions levels therefore have insufficient, or at least unproven, predictive power for per-patient IMRT QA.
机译:>目的:这项工作的目的是确定每位患者IMRT QA的每束,平面IMRT QA通过率与一些临床相关,基于解剖的剂量误差之间的统计相关性。目的是评估常规常规IMRT QA性能指标(每束伽马射线通过率)的预测能力。>方法:通过在24种剂量中诱发四种剂量误差,创建了96个独特的数据集。临床头颈IMRT计划,每个计划都使用6 MV Varian 120片MLC线性加速器,并使用商业治疗计划系统和分步交付方案。无错误的光束计划被用作“模拟测量”(用于生成IMRT QA剂量平面和解剖学剂量指标),以与由错误诱发的计划计算出的相应数据进行比较。调整诱发错误的程度,以模仿使用常规方法通常可以达到的IMRT QA通过率。>结果:分析临床指标(腮腺平均剂量,脊髓最大和D1cc,CTV D95和喉部平均声光与IMRT QA伽玛分析(3%mm3 mm,2∕2,1∕1)显示,在所有情况下,只有弱到中度的相关性(皮尔森r值范围:-0.295至0.653)。此外,中等相关性实际上具有正的Pearson r值(即,随着IMRT QA通过率的提高,临床相关的指标差异也随之增加),表明在IMRT QA通过率较高的情况下,某些基于解剖学的剂量差异最大,这可以称为“假阴性”。结果还显示出许多假阳性实例,或者低IMRT QA通过率并不意味着解剖剂量指标存在较大误差的情况。在任何情况下都没有与平面IMRT通过率的高预测能力相符的相关性,即,在所有情况下都没有通过高IMRT QA伽马通过率来预测解剖剂量指标的低误差,反之亦然。>结论:< / strong>常规IMRT QA性能指标(伽玛通过率)与感兴趣的解剖区域中的剂量误差之间缺乏相关性。因此,最常见的接受标准和已发布的操作级别对于每位患者IMRT QA的预测能力不足,或至少未经证实。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号