首页> 美国卫生研究院文献>The Scientific World Journal >Hands-Off and Hands-On Casting Consistency of Amputee below Knee Sockets Using Magnetic Resonance Imaging
【2h】

Hands-Off and Hands-On Casting Consistency of Amputee below Knee Sockets Using Magnetic Resonance Imaging

机译:磁共振成像技术在膝窝以下截肢者的不用手和不用手铸造一致性

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Residual limb shape capturing (Casting) consistency has a great influence on the quality of socket fit. Magnetic Resonance Imaging was used to establish a reliable reference grid for intercast and intracast shape and volume consistency of two common casting methods, Hands-off and Hands-on. Residual limbs were cast for twelve people with a unilateral below knee amputation and scanned twice for each casting concept. Subsequently, all four volume images of each amputee were semiautomatically segmented and registered to a common coordinate system using the tibia and then the shape and volume differences were calculated. The results show that both casting methods have intra cast volume consistency and there is no significant volume difference between the two methods. Inter- and intracast mean volume differences were not clinically significant based on the volume of one sock criteria. Neither the Hands-off nor the Hands-on method resulted in a consistent residual limb shape as the coefficient of variation of shape differences was high. The resultant shape of the residual limb in the Hands-off casting was variable but the differences were not clinically significant. For the Hands-on casting, shape differences were equal to the maximum acceptable limit for a poor socket fit.
机译:残肢形状捕获(铸造)的一致性对承窝配合的质量影响很大。磁共振成像用于建立可靠的参考栅格,以确保两种常用浇铸方法(Hands-off和Hands-on)的铸件和铸件的形状和体积一致性。残肢用单侧膝下截肢术的十二个人进行铸造,每个铸造概念扫描两次。随后,将每个截肢者的所有四个体积图像进行半自动分割,并使用胫骨套准到一个共同的坐标系,然后计算形状和体积差异。结果表明,两种浇铸方法都具有内部浇铸体积一致性,并且两种方法之间没有显着的体积差异。基于一只袜子标准的体积,cast间和intra内平均体积差异在临床上并不显着。因为形状差异的变异系数很高,所以“移开”方法和“移开”方法都不会导致一致的残留肢体形状。免提铸造中残留肢体的最终形状是可变的,但差异在临床上并不显着。对于动手铸造,形状差等于不良承窝配合的最大可接受极限。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号