首页> 美国卫生研究院文献>Nanomaterials >Solution-Plasma-Mediated Synthesis of Si Nanoparticles for Anode Material of Lithium-Ion Batteries
【2h】

Solution-Plasma-Mediated Synthesis of Si Nanoparticles for Anode Material of Lithium-Ion Batteries

机译:溶液-等离子体法合成锂离子电池负极材料的硅纳米粒子

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Silicon anodes have attracted considerable attention for their use in lithium-ion batteries because of their extremely high theoretical capacity; however, they are prone to extensive volume expansion during lithiation, which causes disintegration and poor cycling stability. In this article, we use two approaches to address this issue, by reducing the size of the Si particles to nanoscale and incorporating them into a carbon composite to help modulate the volume expansion problems. We improve our previous work on the solution-plasma-mediated synthesis of Si nanoparticles (NPs) by adjusting the electrolyte medium to mild buffer solutions rather than strong acids, successfully generating Si-NPs with <10 nm diameters. We then combined these Si-NPs with carbon using MgO-template-assisted sol-gel combustion synthesis, which afforded porous carbon composite materials. Among the preparations, the composite material obtained from the LiCl 0.2 M + H3BO3 0.15 M solution-based Si-NPs exhibited a high reversible capacity of 537 mAh/g after 30 discharge/charge cycles at a current rate of 0.5 A/g. We attribute this increased reversible capacity to the decreased particle size of the Si-NPs. These results clearly show the applicability of this facile and environmentally friendly solution-plasma technique for producing Si-NPs as an anode material for lithium-ion batteries.
机译:硅阳极由于其极高的理论容量而在锂离子电池中的使用引起了广泛的关注。但是,它们在锂化过程中易于大量膨胀,这会导致崩解和较差的循环稳定性。在本文中,我们使用两种方法来解决此问题,方法是将Si颗粒的尺寸减小至纳米级,然后将它们掺入碳复合材料中,以帮助解决体积膨胀问题。通过将电解质介质调整为温和的缓冲溶液而不是强酸,我们改进了先前在溶液-等离子体介导的Si纳米颗粒(NPs)合成方面的工作,成功地生成了直径小于10 nm的Si-NPs。然后,我们使用MgO模板辅助的溶胶-凝胶燃烧合成法将这些Si-NP与碳结合,从而得到多孔碳复合材料。在这些制剂中,从LiCl 0.2 M + H3BO3 0.15 M溶液基Si-NPs获得的复合材料在30次放电/充电循环后,以0.5 A / g的电流速率显示出537 mAh / g的高可逆容量。我们将这种可逆容量的增加归因于Si-NPs粒径的减小。这些结果清楚地表明了这种简便且环境友好的溶液等离子体技术在生产Si-NPs作为锂离子电池负极材料方面的适用性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号