首页> 美国卫生研究院文献>European Journal of Dentistry >Effects of Light Curing Method and Exposure Time on Mechanical Properties of Resin Based Dental Materials

【2h】

Effects of Light Curing Method and Exposure Time on Mechanical Properties of Resin Based Dental Materials

机译：光固化方法和曝光时间对树脂基牙科材料力学性能的影响

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

摘要
著录项
相似文献
相关主题

摘要

ObjectivesThe aim of this study was to investigate microhardness and compressive strength of composite resin (Tetric-Ceram, Ivoclar Vivadent), compomer (Compoglass, Ivoclar, Vivadent), and resin modified glass ionomer cement (Fuji II LC, GC Corp) polymerized using halogen light (Optilux 501, Demetron, Kerr) and LED (Bluephase C5, Ivoclar Vivadent) for different curing times.

机译：目的本研究的目的是研究使用卤素聚合的复合树脂（Tetric-Ceram，Ivoclar Vivadent），复合体（Compoglass，Ivoclar，Vivadent）和树脂改性的玻璃离聚物水泥（Fuji II LC，GC Corp）的显微硬度和抗压强度。灯（Optilux 501，Demetron，Kerr）和LED（Bluephase C5，Ivoclar Vivadent）用于不同的固化时间。

著录项

期刊名称 European Journal of Dentistry
作者
A. Riza Alpöz; Fahinur Ertuḡrul; Dilsah Cogulu; Asli Topaloḡlu Ak; Metin Tanoḡlu; Elçin Kaya;
展开▼
作者单位

展开▼
年(卷),期 2008(2),-1
年度 2008
页码 37–42
总页数 6
原文格式 PDF
正文语种
中图分类口腔科;牙科材料学;
关键词
Microhardness Compressive strength LED Halogen light;

机译：显微硬度;抗压强度;LED;卤素灯;
入库时间 2022-08-17 12:13:02

相似文献

外文文献
中文文献
专利

1. Effects of Light Curing Method and Exposure Time on Mechanical Properties of Resin Based Dental Materials [J] . A. Riza Alpoz, DDS PhD, a Fahinur Ertuarul, European Journal of Dentistry . 2008,第4期

机译：光固化方法和曝光时间对树脂基牙科材料力学性能的影响
2. Influence of extended light exposure curing times on the degree of conversion of resin-based pit and fissure sealant materials [J] . Nazish Fatima The Saudi Dental Journal . 2014,第4期

机译：延长曝光固化时间对树脂基坑缝密封剂材料转化率的影响
3. The effect of the curing time and the distance from the light source on hardness of Methacrylate and Silorane resin-based dental composite materials [J] . P. Malara, Z. Czech, W. ?widerski Archives of Materials Science and Engineering . 2014,第1期

机译：固化时间和距光源的距离对甲基丙烯酸酯和硅烷树脂基牙科复合材料硬度的影响
4. Influence of Light-Curing Mode on the Mechanical Properties of Dental Resin Nanocomposites [C] . Ivanisevic Aljosa, Lainovic Tijana, Blazic Larisa, DAAAM International Symposium on Intelligent Manufacturing and Automation . 2014

机译：光固化模式对牙科纳米复合材料力学性能的影响
5. Development of dental restorative materials based on visible light-cured multi-methacrylates. [D] . Tiba, Amer. 1998

机译：基于可见光固化的多甲基丙烯酸酯的牙科修复材料的开发。
6. Influence of extended light exposure curing times on the degree of conversion of resin-based pit and fissure sealant materials [O] . Nazish Fatima 2014

机译：延长曝光固化时间对树脂基坑缝密封材料转化率的影响
7. Influence of extended light exposure curing times on the degree of conversion of resin-based pit and fissure sealant materials [O] . Nazish Fatima 2014

机译：延长曝光固化时间对树脂基坑和裂缝密封胶材料转化程度的影响
8. Effects of longtime environmental exposure on mechanical properties of sheet materials for a supersonic transport [R] . Gardner, J. E., Pride, R. A., Royster, D. M., 1968

机译：长期环境暴露对超音速运输板材力学性能的影响

Effects of Light Curing Method and Exposure Time on Mechanical Properties of Resin Based Dental Materials

摘要

著录项

相似文献

相关主题

期刊订阅