首页> 美国卫生研究院文献>Materials >Polystyrene-co-Divinylbenzene PolyHIPE Monoliths in 1.0 mm Column Formats for Liquid Chromatography
【2h】

Polystyrene-co-Divinylbenzene PolyHIPE Monoliths in 1.0 mm Column Formats for Liquid Chromatography

机译:1.0 mm色谱柱形式的聚苯乙烯-二乙烯基苯PolyHIPE整体柱

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

The reversed phase liquid chromatographic (RP-HPLC) separation of small molecules using a polystyrene-co-divinylbenzene (PS-co-DVB) polyHIPE stationary phases housed within 1.0 mm i.d. silcosteel columns is presented within this study. A 90% PS-co-DVB polyHIPE was covalently attached to the walls of the column housing by prior wall modification with 3-(trimethoxysilyl) propyl methacrylate and could withstand operating backpressures in excess of 200 bar at a flow rate of 1.2 mL/min. Permeability studies revealed that the monolith swelled slightly in 100% acetonitrile relative to 100% water but could nevertheless be used to separate five alkylbenzenes using a flow rate of 40 µL/min (linear velocity: 0.57 mm/s). Remarkable column-to-column reproducibility is shown with retention factor variation between 2.6% and 6.1% for two separately prepared columns.
机译:使用容纳在1.0 mm i.d.以内的聚苯乙烯-共二乙烯基苯(PS-co-DVB)polyHIPE固定相进行小分子的反相液相色谱(RP-HPLC)分离。本研究中介绍了silcosteel柱。 90%PS-co-DVB polyHIPE通过预先用甲基丙烯酸3-(三甲氧基甲硅烷基)丙酯进行的壁改性而共价附接到色谱柱外壳的壁上,并且在1.2 mL / min的流速下可以承受超过200 bar的工作背压。渗透性研究表明,相对于100%的水,整料在100%的乙腈中略有溶胀,但仍可用于以40 µL / min的流速(线速度:0.57 mm / s)分离五个烷基苯。显示了出色的色谱柱间重现性,其中两个单独制备的色谱柱的保留因子差异在2.6%和6.1%之间。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号